Download the full catalog - Schaff Piano Supply Co.

96
PIN BLOCK MATERIAL
MULTI-LAMINATED BEECH PIANO PIN BLOCK MATERIAL
(Imported from Germany.)
The picture to the right is of a typical 1-3/8” DELIGNIT ® pin
block showing that there are approximately 21 cross
laminated plys of high quality beech veneers that are
compressed together with a modified hot curing phenolic
resin applied in a special dry-bonding process. These blocks
are used by piano manufacturers throughout the world.
Single and double blocks can be shipped UPS, full panels
must ship via truck.
Single Planks
Stock Numbers
Double Planks Full Panel
Thickness 9-1/4”W x 59”L 18-1/2”W x 59”L 47-1/4”W x 59”L
1-1/4” 490 491 492
1-3/8” 493 494 495
1-1/2” 496 497 498
MAPLE PIN BLOCK MATERIAL
Laminated from Northern Rock Maple. Outstanding quality and uniformity.
Stock Numbers
Single Planks Double Planks
Thickness 9-1/2”W x 59”L 22”W x 59”L
1-1/4” 563 563D
1-3/8” 562 562D
1-1/2” 564 564D
PIN BLOCK DUPLICATION
We also rough cut planks to your specific needs. Submit old
plank for sample. Tuning pin holes CANNOT be drilled in
new planks as this operation MUST be done after plank is
fitted behind plate. Specify Delignit ® or Maple material.
BASS BRIDGE DUPLICATION
Made to order; pinned and ready to install in piano.
Send the old bridge to us and we will duplicate it.
BRIDGE CAP MATERIAL (NOT SHOWN)
Laminated beech material produced by the manufacturers of Delignit ® . Sheet measures 24” x 48” x 15/32” thick.
No. 500 - Bridge Capping Material. Each