Download the full catalog - Schaff Piano Supply Co.
Download the full catalog - Schaff Piano Supply Co.
Download the full catalog - Schaff Piano Supply Co.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SHOP TOOLS<br />
CLAMPS<br />
“C” CLAMPS<br />
Adjustable “C” clamps have correctly designed malleable<br />
iron frames for <strong>the</strong> greatest strength. Clamps also have<br />
oscillating swivels that stay put, care<strong>full</strong>y fitted steel screws<br />
and sliding “vise type” handles.<br />
No. CT-50 - 1” Opening, 1” Throat Depth. Each<br />
No. CT-54 - 2” Opening, 1” Throat Depth. Each<br />
DEEP THROAT “C” CLAMP<br />
This clamp has all <strong>the</strong> characteristics of <strong>the</strong> above clamps and<br />
provides a load capacity of 1,600 lbs. The maximum opening<br />
is 2-1/2” with a throat depth of 6-1/4”.<br />
No. CT-58 - Deep Throat “C” Clamp. Each<br />
3-WAY EDGING CLAMP<br />
Again, this clamp has all of <strong>the</strong> characteristics of <strong>the</strong> above<br />
clamps as well as providing a convenient, practical method<br />
for applying “right angle” pressure to <strong>the</strong> edge or side of<br />
work. Indispensable for installing or repairing molding, trim,<br />
decorative attachments, etc. Opening capacity is 2-1/2” and<br />
maximum throat depth is 2-1/2”.<br />
No. CT-325 - 3-Way Edging Clamp. Each<br />
PIPE CLAMP FIXTURE<br />
To be used with 3/4” diameter pipe that is not included. Fixture<br />
consists of a head piece, screw and handle, toge<strong>the</strong>r with a<br />
multiple disc clutch foot that has a 1-3/4” clamping surface.<br />
Baked enamel finish.<br />
No. CT-600 - Pipe Clamp Fixture. Each<br />
ADJUSTABLE HANDSCREWS<br />
Used for gluing and assembly of woodwork, furniture, cabinet<br />
work, musical instruments, etc. The hard maple jaws do not mar<br />
<strong>the</strong> work, and can afford a broad area of evenly distributed<br />
pressure or concentration at one point. Steel spindle hand<br />
screws have hard maple handles.<br />
No. CT-708 - 8” long jaws, 4-1/2” jaw opening. Each<br />
No. CT-714 - 14” long jaws, 10” jaw opening. Each<br />
No. CT-718 - 18” long jaws, 14” jaw opening. Each<br />
NYLON BAND CLAMP<br />
A lightweight, low priced clamping device with many<br />
applications. The 1” wide x 15 foot long nylon band encircles<br />
any round or irregular shape to apply pressure all around <strong>the</strong><br />
work. Clamp comes with four steel corners for picture frame<br />
or mitered joint clamping, as well as a self-locking cam and a<br />
small wrench for final tightening.<br />
No. CT-215 - Nylon Band Clamp. Each<br />
STEEL BAR CLAMP<br />
This is a lightweight, low priced, instant acting bar clamp<br />
whose multiple disc clutch permits instant adjustment with a<br />
quick release. Clamp has a 6” jaw opening and a 2-1/2”<br />
throat depth.<br />
No. CT-400 - Steel Bar Clamp. Each<br />
CANVAS BAND CLAMP<br />
Similar to <strong>the</strong> nylon band clamp listed above except that<br />
<strong>the</strong> band is made of a 2” wide x 15 foot pre-stretched<br />
canvas. This heavy duty clamp has self locking cams to<br />
hold <strong>the</strong> bend securely after being tightened down with<br />
<strong>the</strong> 5/8” diameter steel screw. Rubber pad on <strong>the</strong> base<br />
unit protects finished surfaces.<br />
No. CT-615 - Canvas Band Clamp. Each<br />
81