Download the full catalog - Schaff Piano Supply Co.

HEAT AND GLUE GUNS
WELLER HEAT GUN
Weighing just 13 oz. and having a long, 3/4” diameter
nose makes this heat gun ideal for all types of
precision piano action work. With the four attachments
included, as shown in the picture, heat can be applied
to a very defined area for such jobs as hammer shank
bending. This gun reaches to 800 degrees in 10
seconds; is 120 volts, 250 watts; has a hot and cold air
switch and comes with a 6 ft. cord.
No. 415 - Heat Gun. Each
UNGAR HEAT GUN
This is a general purpose heat gun that has two heat
positions, low is 790 degrees and high is 1,200
degrees. The gun’s blunt nose end is 1” diameter for
ease in heating a large area. Two attachments, a
reducer and a reflector, are included for more precise
work. Weighing 22 oz., 120 volts, 1,000 watts and
having a 6 ft. cord are the heat gun’s other features.
No. 416 - Ungar Heat Gun. Each
GLUE GUN
Trigger feed control makes this Thermogrip® glue gun easy to use for
bonding wood, leather, paper, etc. in just 60 seconds. Gun uses large 4”
glue sticks (not included) and, for convenience, any unused glue can
remain in the tool. See separate listing for ordering a supply of glue sticks.
No. 420 - Glue Gun. Each
THERMOGRIP® HOT MELT GLUE STICKS (NOT SHOWN)
Used for the No. 420 glue guns, these all purpose glue sticks
are 4” long and come 30 pcs. to a box.
No. 404 - Hot Melt Glue Sticks. Box of 30
HOLD-HEET ® ELECTRIC GLUE POT
Glue pot has an automatic thermostat control that will hold glue temperatures within
1 degree so that glue will not be overheated. The pot is double insulated enabling the
heat to stay on the inside, thus saving on energy costs. The quart size, removable
container is made from heavy spun aluminum that has a turnover flange to prevent
glue from lodging in the inner chamber.
No. G-1155 - Electric Glue Pot. Each
77