Download the full catalog - Schaff Piano Supply Co.

TECHNICIAN’S TOOLS
SECTIONAL STEEL RODS
Set includes 4 rods, each 13” long, that are screwed together
and are used for holding upright drop action stickers out of
the way when removing the action from the piano. Most
action brackets have hooks cast into them to hold this rod.
Nickel plated.
No. 3339 - Sectional Steel Rods. Per Set
HALE FELT CUTTER
Will cut soft felts, such as grand
and upright damper felt, damper lifter
felt, also buckskin and tracker bar tubing.
No. 279 - Hale Felt Cutter. Each
ROTARY FABRIC & FELT CUTTER
Cuts felt, fabrics, and leather into strips easily and accurately.
Furnished with one extra blade and a 6” x 18” cutting mat.
No. 6000A - Rotary Felt Cutter, Mat and Extra Blade. Set
No. 6000B - Cutting Mat 6” x 18” Only. Each
No. 6000C - Replacement Blade for
No. 6000A Cutter. Each
3-IN-1 STRING HEIGHT GAUGE
For measuring string height from grand key
bed, regulating grand dampers and also used
to determine if grand hammers are “over
centering” when striking the strings. Unit is
steel constructed with a base 3” x 1-1/2”,
and a closed overall height of 6-5/8”.
No. 933 - 3-In-1 String Height Gauge. Each
FELT CUTTING KNIFE
A handy, pointed blade knife that is good for cutting all
types of piano felts and leather. Knife blade is 3-3/4” long,
overall length is 8” long.
No. 213 - Felt Cutting Knife. Each
SQUARE END KNIFE
Used for all types of piano felts and leather products. Knife
blade measures 6” l x 1” w and overall length is 10-1/4” long.
No. 216 - Square End Knife. Each
PRECISION KNIFE SET
Consists of 3 different weight aluminum handles that are
all 5” long, and an assortment of 10 knife blades. This set
will solve any piano felt or leather trimming problem.
Comes in a wooden chest.
No. 280 - Precision Knife Set. Each
HEAT CONTROL UNIT
Will control the watts generated from any 120 volt tool up to
400 total watts. We recommend using this controller with our
No. 99 5-In-1 Tool Kit shown on the next page.
No. 906 - Heat Control Unit. Each
55