Download the full catalog - Schaff Piano Supply Co.

TECHNICIAN’S TOOLS
PLASTIC OILER WITH FLEXIBLE SPOUT
These polyethylene squeeze bottles have a flexible
spout enabling them to reach anywhere. A shut off
valve is located in the cap thereby reducing lost
tips. Simply pull spout to dispense liquid. Push
spout to shut off. Available in 2 or 4 oz.
No. 191 - 2 oz. Plastic Oiler. Each
No. 191A - 4 oz. Plastic Oiler. Each
PLASTIC OILER
A 1/2 oz. polyethylene plastic squeeze applicator. Excellent
for applying Protek lubricant on action parts.
No. 186 - Oiler. Each
ALCOHOL LAMP
This is the traditional all brass lamp that
is used for hammer shank heating. The 6”
long spout is removable so that the alcohol container can be
sealed with the cap provided, thus allowing the lamp to be
transported without leaking. Unit is 9-1/2” in overall length
and comes with a cotton wick, which is replaceable.
No. 185 - Alcohol Lamp. Each
No. 185A - Extra Wicks. Each
ALCOHOL LAMP
Leakproof with ratchet controlled wick
and chained extinguisher cap. Capacity
5 oz. Diameter 3-1/2”.
No. 181A - Metal Alcohol Lamp. Each
No. 181AW - Wicks. Each
No. 181B - Glass Alcohol Lamp. Each
No. 181BW - Wicks. Each
HAMMER HEAD AND BUTT BORER
An on-the-spot tool to be used for boring exact angles into
piano hammers or hammer butts. The adjustable drill block is
set at the proper angle by using an original hammer or butt
sample. Complete instructions covering all of the variable
boring requirements are provided. Unit consists of the drill
block and base, “C” clamp and 7/32” drill with handle.
No. 170 - Hammer Head and Butt Borer. Each
HAMMER HEAD AND
BUTT BORING JIG
A precision tool in which all of the
appropriate angles can be set
automatically by using the adjacent,
non-broken hammer or butt sample
as a template. Comes complete with
a 7/32” drill and all of the jig parts
shown in the picture, plus complete
instructions. Use with a hand drill
or in a drill press.
No. 192 - Hammer Head and Butt
Boring Jig. Each
HANDY BORE-OUT GUIDE
Unique design permits on-the-spot boring out of old
hammer shanks. The guide, by tightening the knurled nut,
is clamped in position to drill out the old shank. 2-1/4”
long, nickel plated.
No. 167 - Handy Bore-Out Guide. Each
INSPECTION MIRROR
The 1” x 2” oval mirror can be adjusted to any angle to help
with regulating or repairing difficult viewing areas within the
piano. Mirror is 8-1/2” long and has a pocket spring clip.
No. 281B - Inspection Mirror. Each
JEWELER’S LOUPE
Light weight, easy to wear. This useful
tool will make inspection and assembly
of small parts easier and more accurate.
At a working distance of 2.5” the
magnification is 4x.
No. 3202 - Jeweler’s Loupe. Each
ILLUMINATED MAGNIFIER
Acrylic lens magnifies 4 times to help with small, close-up
work. Plastic case magnifier is only 5” long, and has a 1-1/4”
square viewing area that is illuminated. Takes two AAA
batteries that are included.
No. 62 - Illuminated Magnifier. Each
51