PDF catalog - Teknolab AS

SAMPLE PROCESSING ACCESSORIES
VacMaster Trap Kit
This solvent trap should be installed between the
outlet of the sample processing manifold and the
vacuum source, trapping all liquids aspirated through
the manifold. The trap is compatible with VacMaster-
10, -20 and -96 Sample Processing Manifolds. The kit
consists of a 1L polypropylene vacuum flask, polyethylene
stopper with connectors, sealing gasket and
1.5 m vacuum tubing.
Features and Advantages
• Collect waste solvents and samples, cleanly and efficiently
• Prevent contamination of vacuum control units, removing spray of aspirated liquid
• Easy to clean components, reducing preparation time
Ordering Information
Description Quantity Part number
VacMaster Trap Kit (complete) 1 121-2095
VacMaster Drying Adapter
Prior to elution of analytes from an SPE column
with water immiscible solvents, it is often necessary
to dry the sorbent bed to achieve optimum
and reproducible recoveries. The VacMaster
Drying Adapter directs a stream of gas efficiently
through the column, significantly reducing drying
times compared to vacuum aspirated air flow.
The adapter comes complete with all fittings for
1, 3 and 6 mL columns.
Features and Advantages
• Can be used with standard laboratory gas systems (eg nitrogen, air)
• Fast efficient SPE column drying
• Options for VacMaster-10 and VacMaster-20 sample processing manifolds
Ordering Information
Description Quantity Part number
VacMaster-10 Drying Adapter for 1,3 & 6 mL columns 1 124-1001
VacMaster-20 Drying Adapter for 1,3 & 6 mL columns 1 124-2001
Drying Adapters for other column sizes are available through our Custom Manufacturing Service (see page 157-159).
108