5.Control system - Meibes

1. Safety instructions
■ The installation and initial operation of the freshwater
station is only to be carried out by a specialist
tradesman.
■ The necessary DIN and VDE provisions are to be
observed (e.g. DIN 4751, DIN 4753, DIN 1988
and VDE 0100)
■ The provisions of local energy supply companies are
to be observed
■ Improper installation as well as misuse of the
freshwater station will exclude any liability as regards
guarantee claims
Please note:
■ Before operating on the control system and the
circulating pump, they are to be switched at zero
potential as prescribed
■ In the event of a power supply interruption, the
preset values are retained
■ In the event of a power failure, the system clock
settings in the control system are retained for
approx. 24 hours
2. Technical specifications
Heating connections 3/4“ female 3/4“ IG
Plumbing connections 3/4” female 3/4” IG
Heating operating pressure 3 bar
Plumbing operating pressure 6 bar
Maximum allowed temperature 110°C
Controller protection class IP 54
Supply voltage 230VAC / 50Hz
Dimensions (height/length/breadth) in mm 660 x 455 x 215
2
■ A menu for basic settings is available which may only
be modified by a specialist tradesman. This ensures
the technical functioning and security of the system!
■ All the relevant old as well as recently enforced
provisions and norms as well as provisions and
norms not mentioned, but relevant for application in
a particular case, are to be followed
■ The legal provisions relating to the prevention of
accidents are to be followed