Caché Installation Guide - InterSystems Documentation

Caché Standard Installation
CAUTION:
Configuring the CSP Gateway overlays any changes you previously made in the
CSP Gateway configuration and selecting the Web server option overlays changes
in the Web server configuration. In particular, it overlays any previous configuration
for / and /csp.
See the “Web Servers for UNIX, LINUX, and Mac OS X” chapter of Installing and Configuring
the CSP Gateway for more information.
10. Finally, review your installation options and press enter to proceed with the installation. File
copying does not begin until you answer Yes.
A standard installation sets the following port numbers for a Caché instance:
• Superserver port number — 1972 or the first available subsequent number equal to or higher
than 56773
• Web server port number — 57772 or the first available subsequent number
• Telnet port number — 23
If you want to assign different port numbers during a new installation you must choose the custom
option. See the Caché Custom Installation section for details.
You may change the superserver port value after installation from the [Home] > [Configuration] >
[Memory and Startup] page of the System Management Portal.
You may change the WebServerPort and Telnet port values after installation from the [Home] >
[Configuration] > [Startup Settings] and [Home] > [Configuration] > [Device Settings] > [Telnet Settings]
pages, respectively, of the System Management Portal.
When the installation completes, you are directed to the appropriate URL for the System Management
Portal to manage your Caché system. See the “Using the System Management Portal” chapter of the
Caché System Administration Guide for more information.
4.3.3.1 Caché Custom Installation
If you choose a custom installation, you must answer additional questions throughout the procedure
about installing several individual components. The defaults appear in brackets before the question
mark (); press Enter to accept the default.
1. Manager Utility Source Code — Installs the utility source code into the %SYS namespace.
2. Superserver and Web Server Ports — You can choose to let Caché assign the port numbers as
described in the standard installation procedure or you can enter custom port numbers. Upgrade
installs do not offer this choice; they keep the port numbers of the original instance.
3. Additional Security Options — If you chose Normal or Locked Down initial security you have
the choice to configure additional security options (minimal installations use the default IDs):
Caché Installation Guide 45