VL1000 ERS Luminaire User's Manual - Vari-Lite
VL1000 ERS Luminaire User's Manual - Vari-Lite
VL1000 ERS Luminaire User's Manual - Vari-Lite
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION : INSTALLATION PROCEDURES<br />
2<br />
Accessory Frame Holder<br />
An accessory frame holder is provided for the addition of a top hat or gel frame with silks, frosts or<br />
color correction if required. The frame holder is designed to fit a standard 8-inch gel frame or top hat.<br />
To remove and replace frame or top hat:<br />
Step 1. Disconnect luminaire AC input cable from power source.<br />
Step 2. At front lens, press upward on accessory frame latch and turn to open.<br />
Step 3. Remove frame/top hat, if any (Figure 2-8).<br />
Step 4. Install frame/top hat and close latch.<br />
Press Up<br />
and Turn<br />
Latch<br />
Gel, Silk, or<br />
Frost<br />
Head Assembly<br />
Accessory Frame<br />
NOTE:<br />
The accessory frame is not a <strong>Vari</strong>-<strong>Lite</strong> accessory.<br />
Figure 2-8: Installing a Frame or Top Hat<br />
02.9663.0001 D 04-Apr-03 19