VL1000 ERS Luminaire User's Manual - Vari-Lite
VL1000 ERS Luminaire User's Manual - Vari-Lite
VL1000 ERS Luminaire User's Manual - Vari-Lite
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TROUBLESHOOTING AND MAINTENANCE<br />
A<br />
Step<br />
7. Re-install front cover.<br />
CAUTION:<br />
Gobo MUST be oriented with side marked<br />
"This Edge In" toward center of wheel and<br />
side marked "Lamp Side" toward lamp. If<br />
not oriented properly, gobo will break.<br />
Be careful not to scratch gobo on side of<br />
carrier when installing.<br />
Inside Edge<br />
- orient toward center of wheel<br />
ThisEdgeIn<br />
LampSide<br />
Lamp Side (mirrored)<br />
- orient toward luminaire lamp<br />
Closed End<br />
Rotate until open<br />
end of carrier is up<br />
Gear<br />
Open End<br />
Front Cover<br />
Gobo Positions<br />
Sensor<br />
2<br />
1<br />
open<br />
6<br />
3<br />
5<br />
Gobo<br />
(black side)<br />
Latch<br />
Gobo Wheel Front View<br />
4<br />
Lamp End<br />
Rotating<br />
Gobo Wheel<br />
CAUTION:<br />
Be careful not to pull metal spring clip carrier<br />
back too far or it will not close properly.<br />
Center of Wheel<br />
Figure A-1: Rotating Gobo Replacement/Cleaning<br />
02.9663.0001 D 04-Apr-03 67