U.S. DEPARTMENT OF TRANSPORTATION - SaferCar.gov

SINCAP MDB - 25
No. 028 – Pre-Test Left Side View of Driver Dummy Shoulder and Door Top View (The driver
door should be closed.)
No. 029 – Post-Test Left Side View of Driver Dummy Shoulder and Door Top View (The driver
door should be closed.)
No. 030 – Pre-Test Frontal View of Driver Seat Back Prior to Dummy Positioning (The head
restraint should be included in the photograph, along with a visible centerline that is
drawn on the seat back and head restraint.)
No. 031 – Pre-Test Frontal View of Driver Dummy Head and Shoulders in Relation to Head
Restraint
No. 032 – Pre-Test Frontal View of Driver Seat Pan Prior to Dummy Positioning (This photograph
should show a visible centerline that is drawn onto the seat cushion.)
No. 033 – Pre-Test Overhead View of Driver Dummy Thighs on Seat Pan (This photograph
should show the centerline on the seat pan between the dummy’s legs, if possible.)
No. 034 – Pre-Test Placement of Driver Dummy’s Feet
No. 035 – Pre-Test View of Belt Anchorage for Driver Dummy (This photograph should show the
position of the upper belt anchorage. Detent or millimeter markings should be shown
and labeled, if applicable.)
No. 036 – Pre-Test Left Side View of Steering Wheel (This photograph should show the test
position of the steering wheel. Detent or millimeter markings should be shown and
labeled, if applicable.)
No. 037 – View of Disengaged Parking Brake (This photograph should be taken at the same time
as As-Delivered photos)
No. 038 – Pre-Test View of Parking Brake (This photograph should be taken at the same angle
as the previous photo.)
No. 039 – Pre-Test Close-Up Left Side View of Driver Seat Track (This photograph should show
the test position of the seat track. Detent or millimeter markings should be shown and
labeled, if applicable.)
No. 040 – Pre-test Close-Up Left Side View of Driver Seat Back (This photograph should show
the test position of the seat back. Detent or millimeter markings should be shown and
labeled, if applicable.)
No. 041 – Pre-Test Close-Up View of Driver Seat Back or Head Restraint (This photograph
should show the test position and should include a level, placed at the manufacturer’s
designated location, to show the angle of the test position.)
No. 042 – Pre-Test Driver Dummy and Door Clearance View (This photograph should be taken
from above, looking down into the vehicle with the driver door closed. It should depict
the clearance between the driver dummy and the door interior.)
No. 043 – Post-Test Driver Dummy and Door Clearance View (This photograph should be taken
as similarly to the pre-test photo as is feasible.)
No. 044 – Pre-Test Right Side View of Driver Dummy and Front Seat of Occupant Compartment
(This photograph should be taken through the vehicle with the right front passenger
door open.)
No. 045 – Post-Test Right Side View of Driver Dummy and Front Seat Occupant Compartment
(This photograph should be taken through the vehicle with the right front passenger
door open.)
No. 046 – Pre-Test Driver Inner Door Panel View (This photograph should be taken through the
vehicle with the right front passenger door open. The seat back should be adjusted
such that it is close to the anticipated test position.)
No. 047 – Post-Test Driver Inner Door Panel View Showing Driver Dummy Contact Locations
(This photograph should be taken through the vehicle with the right front passenger
door open. It should be taken after the dummy is removed but prior to the airbags
being handled or rearranged.)
No. 048 – Post-Test Driver Dummy Close-Up Head Contact with Vehicle View (This photograph
should only be taken if it is applicable. Otherwise, use a placeholder graphic.)
No. 049 – Post-Test Driver Dummy Close-Up Head Contact with Side Air Bag View (This
photograph should only be taken if it is applicable. Otherwise, use a placeholder
graphic. The airbag should be arranged to show contact marks.)