PrintFactory—RIP User Manual
PrintFactory—RIP User Manual
PrintFactory—RIP User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PrintFactory RIP <strong>User</strong> <strong>Manual</strong><br />
Chapter 1: Installing PrintFactory 11<br />
Installing the spectrophotometer<br />
When do you need a spectrophotometer<br />
You need spectrophotometers to perform the following tasks:<br />
• Creating printer profiles<br />
• Relinearizing printers that have fallen out of calibration<br />
See also:<br />
• Calibrating printers in the PrintFactory Calibrator <strong>User</strong> <strong>Manual</strong><br />
• Relinearizing the printer profile in the PrintFactory Calibrator <strong>User</strong> <strong>Manual</strong><br />
Supported spectrophotometers<br />
PrintFactory supports the following spectrophotometers, and any others identified<br />
on www.print-factory.net.<br />
Manufacturer<br />
Barbieri<br />
GretagMacBeth<br />
XRite<br />
Models<br />
Swing, 50xy, LFP, LFP-RT<br />
Spectroscan/Spectrolino, Eye-One, Eye-One-IO, iSis<br />
DTP41, DTP41 USB, DTP45, DTP70<br />
For other supported devices please refer to PrintFactory Calibrator.<br />
You or your Four Pees reseller (if they are the actual user of the device) should install<br />
necessary driver software on the PrintFactory computer if it is a Windows PC. Refer<br />
to the installation instructions of the respective spectrophotometer.<br />
See also:<br />
• Setting up the spectrophotometer on page 22
Change language