GIMP tools - BDA

207
How to use this filter?
1. Open an image.
2. Apply Filters DistortsWave command. It opens the Waves dialog box
3. Set the following parameters:
Mode – specify how the areas of the image rendered empty because of the
waves should look like:
• Smear – fill the empty areas with adjacent colours;
• Blacken – fill the empty areas with black colour;
Reflective checkbox – create the reflective waves that significantly change the
image;
The slider of the Amplitude scale is used to select the wave height. The higher
the value, the more embossed the image gets;
The values chosen by the slider of the Phase scale change the location of waves
without changing their characteristics;
The slider of the Wavelength scale is used to set the length and distance
between the waves. The higher the value, the longer and milder the waves get.
TASK. Open image fil_8.jpg. Apply the Wind filter to the image by setting the following
parameters:
a)
Mode – Smear;
Uncheck the Reflective checkbox;
Use the slider of the Amplitude scale to set the value to 12.00;
Use the slider of the Phase scale to set the value to 72.00;