GIMP tools - BDA

257
The Width parameter sets the width of grid line. Once the width of the
Horizontal grid line is set move to the Vertical box that shows the same value as
set in the Horizontal box if there is a link between boxes, i.e. if the chain is not
broken
both boxes;
to get
. In case different values are required, press
. Now you can enter different values to
Note!
By pressing
, a list opens where you can choose the measurement units for
the width of a grid line, spacing between lines, and the offset.
Note!
The Spacing parameter sets the spacing between grid lines. The higher the
value, the larger the squares;
The Offset parameter sets the distance of moving the grid to the sides or to the
upper part;
You can choose the grid colour by pressing
and selecting the desired
colour in the colour dialog. You may choose different colors for vertical and
horizontal grid lines, you only have to break the chain;
The colour and shape of the intersections between grid lines can only be set when their
width is higher than zero and the distance is equal to zero.
3. Once all parameters are set, press OK;
TASK. Open image grid_2.jpg and apply the Grid filter. After using the filter, a red grid
must be applied to the image with the line width equal to 6 mm, spacing between