GIMP tools - BDA

255
The Number of Titles group-box control controls the number of tiles horizontally
and vertically:
o The slider of the Horizontal scale controls the number of tiles on
the horizontal axis;
o The slider of the Vertical scale controls the number of tiles on
the vertical axis;
Note!
The higher the number of tiles, the smaller they are, because the size of the image does
not increase.
The Bevel Edges group-box control controls the configuration of jigsaw pieces,
i.e. the piece texture:
o The Bevel width parameter controls the slope of the edges of
the puzzle pieces. When the minimum value is set, the pieces
seem as if drawn by a pencil and do not feature any slope of the
edges;
o The Highlight parameter controls the strength of the highlight
that will appear on the edges of each piece;
The Jigsaw Style group-box control controls the shape of pieces:
o If checked, the Square radio button shows that the pieces will
be square-shaped;
o If checked, the Curved radio button shows that the pieces will
be irregular-shaped;
3. Once all parameters are set, press OK;
TASK. Open image puzzle.jpg and divide it to 30 irregular-shaped sloped pieces with
highlighted edges.
1. Open image puzzle.jpg;
2. Apply FiltersRenderPatternJigsaw command. It opens the Script-Fu:
Jigsaw dialog box;
3. Set the following parameters: