GIMP tools - BDA

GIMP 208
b)
A.
Use the slider of the Wavelength scale to set the value to 1.70;
Mode – Smear;
Check the Reflective checkbox;
Use the slider of the Amplitude scale to set the value to 5.00;
Use the slider of the Phase scale to set the value to 72.00;
Use the slider of the Wavelength scale to set the value to 1.70;
1. Select FileOpen command to open image fil_8.jpg;
2. Apply Filters DistortsWave command. It opens the Waves dialog box;
3. Set the following parameters:
Mode – Smear;
Uncheck the Reflective checkbox;
Use the slider of the Amplitude scale to set the value to 12.00;
Use the slider of the Phase scale to set the value to 72.00;
Use the slider of the Wavelength scale to set the value to 1.70;
4. Press OK;
B.
1. Select FileOpen command to open image fil_8.jpg;
2. Apply Filters DistortsWave command. It opens the Waves dialog box;
3. Set the following parameters:
Mode – Smear;
Check the Reflective checkbox;
Use the slider of the Amplitude scale to set the value to 5.00;
Use the slider of the Phase scale to set the value to 72.00;
Use the slider of the Wavelength scale to set the value to 1.70;
4. Press OK;