GIMP tools - BDA

327
4. Select the Blend Tool and adjust the setting to it:
4.1. Open the Gradient selector and choose Dark 1;
5. Fill the selected area with the gradient selected. Select the direction from left to
right across the centre of the selected area:
6. Reduce the selected area because it is required for the border. Apply
SelectShrink command to open the Shrink Selection dialog and adjust the
following:
6.1. Reduce the selected area by several pixels. Enter 25in the Shrink selection by
input box ;
6.2. Press OK:
7. Repeat clauses 4-5, only change the fill direction to the opposite:
8. Reduce the selected area again. Repeat Clause 6, but enter 10 to the Shrink
selection by input box ;
9. Create a new layer. Apply the LayerNew Layer command to open the New
Layer dialog and adjust the following:
9.1. Layer name – Inside;
9.2. Press OK;
10. Select the Foreground Color – 5a7440 and the Background color – 741515;
11. Select the Blend Tool and adjust the setting to it:
11.1. Open the Gradient selector and choose FG to BG (RGB);