eircom advantage 4800
eircom advantage 4800
eircom advantage 4800
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>eircom</strong> <strong>advantage</strong> <strong>4800</strong> System Installation<br />
2.5.5 Installing the Sixteen (16) Analogue Extension Modules<br />
Advantage <strong>4800</strong><br />
4 ISDN Line Card<br />
Item Code:<br />
Power<br />
Applications<br />
Extension<br />
s 2<br />
Extension<br />
s 1<br />
ADSL<br />
Lines 2<br />
Lines 1<br />
6 5 4 3 2 1<br />
Each of these Analogue extension modules provides sixteen (16) separate extension interfaces<br />
The extension modules can only be installed in Slots 4 and 5 of the system as shown above.<br />
Slot 4 provides analogue extension interfaces for ports numbered PT17 – PT32 on the MDF<br />
Slot 5 provides analogue extension interfaces for ports numbered PT33 – PT48 on the MDF<br />
To install the 16 analogue extension Module:<br />
1. Ensure the System is powered down.<br />
2. Press the sliding plate to the down position and remove the Plastic Slot cover for that slot.<br />
3. Align the Module into the designated slot, pushing firmly until the module is fully inserted.<br />
4. Return the sliding plate to the up position thereby securing the Module into place.<br />
On powering up the system the top LED on the Module will light indicating that the system has<br />
successfully interfaced with it.<br />
16