eircom advantage 4800
eircom advantage 4800
eircom advantage 4800
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>eircom</strong> <strong>advantage</strong> <strong>4800</strong> System Installation<br />
2.5.10 Re-Installing the Analogue Modem module<br />
An Analogue modem is installed by default on the <strong>eircom</strong> <strong>advantage</strong> <strong>4800</strong> allowing the system<br />
to support remote access on PSTN lines. The analogue modem module is secured to the main<br />
board of the system via a 24-pin connector.<br />
To Re-install the analogue modem module:<br />
1. Ensure the system is powered off.<br />
2. Remove the Top cover of the system<br />
3. Align the connector (CN1) of the modem module over the jumper (JP1501) on the main<br />
board as shown.<br />
4. Firmly and slowly push the module down until it is secured.<br />
a<br />
JP1501<br />
Analogue Modem Module<br />
CN01<br />
21
Change language