eircom advantage 4800
eircom advantage 4800
eircom advantage 4800
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>eircom</strong> <strong>advantage</strong> <strong>4800</strong> System Installation<br />
2.5.8 Installing the Ethernet to Ethernet Router Module<br />
Advantage <strong>4800</strong><br />
4 ISDN Line Card<br />
Item Code:<br />
Power<br />
LED 1<br />
LED 2<br />
Applications<br />
Extensions<br />
2<br />
Extensions<br />
1<br />
ADSL<br />
Lines 2<br />
Lines 1<br />
6 5 4 3 2 1<br />
To PC’s on the<br />
internal LAN<br />
ETH-1<br />
ETH-2<br />
To<br />
DSL<br />
Modem<br />
The Ethernet to Ethernet Router module provides broadband internet access to users<br />
connected to the LAN (ETH -1) port of the <strong>eircom</strong> <strong>advantage</strong> <strong>4800</strong> system. This module<br />
requires that the DSL interface supplied by the network provider contains a modem with an<br />
Ethernet interface. This interface is then connected to the port marked ETH-2 on the MDF.<br />
To install the Ethernet to Ethernet Router Module:<br />
1. Ensure the System is powered down.<br />
2. Press the sliding plate to the down position and remove the Plastic Slot cover for that slot.<br />
3. Align the Module into the designated slot, pushing firmly until the module is fully inserted.<br />
4. Return the sliding plate to the up position thereby securing the Module into place.<br />
On powering up the system the top LED on the Module will light indicating that the system has<br />
successfully interfaced with it. The functions of the LED’s on the module are as described<br />
below:<br />
LED<br />
Power<br />
LED 1<br />
LED 2<br />
Function<br />
This LED will light if the Module has been installed correctly on the<br />
system<br />
TBA<br />
TBA<br />
19
Change language