eircom advantage 4800

eircom advantage 4800 System Installation
2.5.9 Installing the Applications Module
Power
Advantage 4800
4 ISDN Line Card
Item Code:
Applications
Extensions 2
Extensions 1
ADSL
Lines 2
Lines 1
6 5 4 3 2 1
The Applications module can only be installed on Slot 6 of the eircom advantage 4800 system
as shown above.
The default, out of box, configuration is Voicemail on two channels with email forwarding of
voicemails as WAV attachments and basic auto attendant.
The card can be remotely downloaded with eircom Advantage Business applications
packages, as follow.
• Advanced Multi-layer Auto Attendant with 10 layers of interactive messages
• Pre-recorded Music on Hold, with downloadable WAV capability, up to 45 minutes
• Recording and email forwarding of voice calls on a global or individual call basis with voice
storage
• Voice over IP user licences, VoIP compression and echo cancellation
• Voice storage expandable up to 20 hours with software keys
The card has up to twelve channels, up to ten of which may be deployed for simultaneous VoIP
calls, or all twelve may be used for voice mail calls.
To install the Applications Module:
1. Ensure the System is powered down.
2. Press the sliding plate to the down position and remove the Plastic Slot cover for that slot.
3. Align the Module into the designated slot, pushing firmly until the module is fully inserted.
4. Return the sliding plate to the up position thereby securing the Module into place.
On powering up the system the top LED on the Module will light indicating that the system has
successfully interfaced with it.
20