Isis Installation Guide - Big Ass Fans

2
What’s in the box
Isis ®
Pre-Installation
CAUTION: Do not remove the motor from its protective packaging prior to hanging it!
CAUTION: If you ordered multiple fans, be sure to keep the components of each fan together.
The fan is shipped in three labeled boxes. The large, square box contains the main fan unit, upper mount, wall controller, wallplate,
in a small box within the main box. A smaller box contains the airfoils. Another small box contains the extension tube and safety
cable. Optional parts are shipped in separate boxes that are labeled to identify the contents. If you are missing any piece required for
installation, contact Big Ass Fans.
Note: Dashed lines indicate internal boxes or bags within the main box. Drawings below are not to scale. All boxes are labeled to
identify the contents.
Main Box 1
OR
Wall Controller
Wall Controller
(240 V, 50/60 Hz)
Upper Mount
(120 V, 60 Hz) 2 Extension
OR
Main Fan Unit
Mounting
Hardware
Wall Controller (240 V, 50 Hz)
Airfoil & Winglet
Hardware
(8) Airfoil
Retainer
Airfoil Box
Washer
(8) Winglet 4 (8) Airfoil Tip (optional) 4
Tube Box
Carabiner 3
Wood Frame Mounting Box 5
OR
(8) Airfoil
Wood Frame Mounting
Brackets & Channels
Extension Tube &
6
1.
2. If installing the fan on a typical lighting circuit with one basic light switch, the Limited Access Controller must be installed.
3.
4. Winglets are standard on Isis ® fans; however, airfoil tips are available as an option. Winglets or airfoil tips are installed on the airfoils during airfoil
installation.
5. Optional. The Wood Frame Mounting kit is included only if ordered.
6.
WWW.BIGASSFANS.COM ©2014 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED