DID 60 standard roller chain - Big Bike Webshop
DID 60 standard roller chain - Big Bike Webshop
DID 60 standard roller chain - Big Bike Webshop
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Tensile<br />
strength index<br />
100<br />
Temperature<br />
Range in Use<br />
10<br />
80<br />
PACK TEXTILE PRINT<br />
HOME<br />
APPLIANCE<br />
Selection of <strong>chain</strong>s<br />
For selection of a <strong>chain</strong>, see the tables of "Max. Horsepower<br />
Ratings" for <strong>standard</strong> <strong>roller</strong> <strong>chain</strong>s (P20 ~ P47) and<br />
"Designing of Chain Transmission" (P120 ~ P126).<br />
However, only for a special case of low speed and less<br />
shock, "Low-speed selection" method (P121) can also be<br />
referred to.<br />
Standard <strong>roller</strong> <strong>chain</strong>s up to five strands are available.<br />
The <strong>standard</strong> method for connecting pins and plates is<br />
rivet type (RP).<br />
The cotter type (CP) is available for <strong>standard</strong> <strong>chain</strong>s and<br />
HK <strong>chain</strong>s of <strong>DID</strong>80 or larger.<br />
Sprockets<br />
The <strong>standard</strong> <strong>roller</strong> <strong>chain</strong>s can be engaged with <strong>standard</strong><br />
sprockets of the corresponding nominal numbers. For<br />
sprockets, refer to the table of "Dimensions" for each size<br />
of <strong>chain</strong>.<br />
Connecting links and offset links<br />
For connecting links and offset links, refer to the table of<br />
"Dimensions" for each size of <strong>chain</strong>.<br />
The connecting links are generally R or C connecting links<br />
in which the pins are clearance-fitted with the connecting<br />
plate. Since clearance-fitted links are inferior to the base<br />
<strong>chain</strong> in Max. allowable tension as in the case of one-pitch<br />
offset links (OJ), "Low-speed selection" (P121) cannot be<br />
referred to. Since the Max. kilowatt ratings are decided<br />
considering the strength of connecting links and OJ, the<br />
clearance-fitted connecting links and OJ can be used if the<br />
<strong>chain</strong>s are selected according to the "General selection".<br />
When a higher Max. allowable tension is required for the<br />
connecting link, use the interference-fitted connecting link<br />
(H connecting link) of a HI-PWR-S <strong>chain</strong>, and in the case of<br />
offset links, use 2POJ. For details, refer to the table of<br />
"Dimensions" for each size of <strong>chain</strong>.<br />
Roller Chains for<br />
Power Transmission<br />
Standard<br />
Roller Chain<br />
RJ<br />
(<strong>DID</strong> <strong>60</strong> or smaller)<br />
CJ<br />
(<strong>DID</strong> 80 or larger)<br />
OJ<br />
(except for <strong>DID</strong> 25)<br />
2POJ<br />
Dimensions<br />
Chain No.<br />
<strong>DID</strong><br />
JIS<br />
Roller<br />
Pitch Link Bush<br />
Pin<br />
Transverse<br />
Plate<br />
Pitch<br />
Width Dia.<br />
P W D d E F G L f g C T H<br />
<strong>DID</strong> 025<br />
<strong>DID</strong> 035<br />
25 06.35<br />
35 09.525<br />
03.18 3.30 02.31<br />
04.78 5.08 03.59<br />
07.8<br />
12.0<br />
08.5<br />
13.1<br />
<br />
<br />
<br />
<br />
04.7<br />
07.3<br />
<br />
<br />
06.4<br />
10.1<br />
0.72<br />
1.25<br />
<strong>DID</strong> 041<br />
<strong>DID</strong> 040<br />
<strong>DID</strong> 050<br />
<strong>DID</strong> 0<strong>60</strong><br />
<strong>DID</strong> 080<br />
<strong>DID</strong> 100<br />
<strong>DID</strong> 120<br />
<strong>DID</strong> 140<br />
<strong>DID</strong> 1<strong>60</strong><br />
<strong>DID</strong> 180<br />
<strong>DID</strong> 200<br />
<strong>DID</strong> 240<br />
41 12.70<br />
40 12.70<br />
50 15.875<br />
<strong>60</strong> 19.05<br />
80 25.40<br />
100 31.75<br />
120 38.10<br />
140 44.45<br />
1<strong>60</strong> 50.80<br />
180 57.15<br />
200 63.50<br />
240 76.20<br />
06.38<br />
07.95<br />
09.53<br />
12.70<br />
15.88<br />
19.05<br />
25.40<br />
25.40<br />
31.75<br />
35.72<br />
38.10<br />
47.63<br />
07.77<br />
07.92<br />
10.16<br />
11.91<br />
15.88<br />
19.05<br />
22.23<br />
25.40<br />
28.58<br />
35.71<br />
39.68<br />
47.63<br />
03.59<br />
03.97<br />
05.09<br />
05.96<br />
07.94<br />
09.54<br />
11.11<br />
12.71<br />
14.29<br />
17.46<br />
19.85<br />
23.81<br />
13.7<br />
16.5<br />
20.3<br />
25.4<br />
32.6<br />
39.5<br />
49.7<br />
53.6<br />
63.6<br />
71.5<br />
77.9<br />
95.2<br />
14.6<br />
17.6<br />
21.9<br />
26.9<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
27.9<br />
35.4<br />
42.5<br />
53.0<br />
58.4<br />
68.2<br />
77.3<br />
85.0<br />
102.9<br />
015.3<br />
019.3<br />
023.1<br />
030.0<br />
036.4<br />
043.5<br />
054.1<br />
059.6<br />
069.7<br />
079.3<br />
087.3<br />
105.4<br />
07.9<br />
09.5<br />
11.6<br />
14.3<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
15.1<br />
19.0<br />
22.8<br />
28.2<br />
31.6<br />
36.4<br />
41.4<br />
45.9<br />
55.3<br />
<br />
14.4<br />
18.1<br />
22.8<br />
29.3<br />
35.8<br />
45.4<br />
48.9<br />
58.5<br />
65.8<br />
71.6<br />
87.8<br />
1.20<br />
1.50<br />
2.00<br />
2.40<br />
3.20<br />
4.00<br />
4.80<br />
5.<strong>60</strong><br />
6.40<br />
7.10<br />
8.00<br />
9.50<br />
Note: 1. Those marked with * indicate bushing <strong>chain</strong>s.<br />
2. The values of average tensile strength and Max. allowable load are for <strong>chain</strong>s.<br />
05.9<br />
09.0<br />
09.6<br />
12.0<br />
15.0<br />
18.1<br />
24.0<br />
29.9<br />
35.9<br />
41.9<br />
47.8<br />
53.8<br />
<strong>60</strong>.0<br />
71.5<br />
Unit (mm)<br />
JIS <strong>DID</strong> <strong>DID</strong> <strong>DID</strong><br />
Min. Tensile Min. Tensile Avg. Tensile Max. Allowable Approx. No. of<br />
Strength Strength Strength Load weight links per<br />
<br />
<br />
<br />
unit<br />
3.6<br />
8.7<br />
7.4<br />
15.2<br />
24<br />
34.2<br />
61.2<br />
95.4<br />
137.1<br />
185.9<br />
244.6<br />
308.2<br />
381.7<br />
550.4<br />
367<br />
887<br />
754<br />
1,549<br />
2,447<br />
3,487<br />
6,240<br />
9,728<br />
13,980<br />
18,956<br />
24,942<br />
31,427<br />
38,922<br />
56,125<br />
003.63<br />
008.83<br />
008.83<br />
015.69<br />
026.48<br />
035.30<br />
071.59<br />
107.80<br />
147.10<br />
193.10<br />
245.10<br />
333.40<br />
431.40<br />
622.70<br />
370<br />
900<br />
900<br />
1,<strong>60</strong>0<br />
2,700<br />
3,<strong>60</strong>0<br />
7,300<br />
11,000<br />
15,000<br />
19,700<br />
25,000<br />
34,000<br />
44,000<br />
63,500<br />
004.41<br />
011.20<br />
010.70<br />
019.10<br />
030.80<br />
044.10<br />
078.40<br />
118.00<br />
166.00<br />
215.00<br />
269.00<br />
362.00<br />
470.00<br />
686.00<br />
450<br />
1,150<br />
1,100<br />
1,950<br />
3,150<br />
4,500<br />
8,000<br />
12,100<br />
17,000<br />
22,000<br />
27,500<br />
37,000<br />
48,000<br />
70,000<br />
0.73<br />
2.15<br />
2.35<br />
3.72<br />
6.86<br />
9.31<br />
14.70<br />
22.50<br />
30.40<br />
40.20<br />
52.90<br />
61.70<br />
73.50<br />
99.00<br />
75<br />
220<br />
240<br />
380<br />
700<br />
950<br />
1,500<br />
2,300<br />
3,100<br />
4,100<br />
5,400<br />
6,300<br />
7,500<br />
10,100<br />
0.13<br />
0.32<br />
0.39<br />
0.63<br />
1.06<br />
1.44<br />
2.55<br />
3.79<br />
5.49<br />
7.11<br />
9.82<br />
12.7<br />
16.5<br />
23.3<br />
1<strong>60</strong><br />
320<br />
240<br />
240<br />
192<br />
1<strong>60</strong><br />
120<br />
96<br />
80<br />
68<br />
<strong>60</strong><br />
54<br />
48<br />
40<br />
19