DID 60 standard roller chain - Big Bike Webshop

More documents

Recommendations

Info

Allowable Load 150 Tensile strength index 125 Temperature Range in Use 10 80 CONST- RUCTION EXCAVATION MINING Selection of chains Select a proper HI-PWR-SHK type chain based on "Low-speed selection" (P121) For the maximum allowable load, see the following table of dimensions. HI-PWR-SHK series is available in simplex. Sprockets Standard sprockets for multiplex chains cannot be used. Connecting links and offset links The best feature of the HI-PWR-SHK roller chains is high maximum allowable load. Therefore, interference-fitted connecting links (H connecting links) with little strength degradation are used. The connecting plate and the connecting pins are connected with spring pins. The tensile strength of an H connecting link is equivalent to that of the chain, but the allowable load is somewhat lower than that of the chain. HI-PWR-S type roller chains do not have any offset link. Use an even number of links. Roller Chains for Power Transmission High-strength Roller Chain Series Never make the holes of the connecting plate larger and never make the pins thinner to facilitate the work for fitting the pins into the connecting plate, since otherwise the fatigue strength will be lowered. HJ Dimensions Chain No. Pitch Roller link width Roller dia. Pin Plate P W D d E G g T H h Unit (mm) Min. tensile Avg. tensile Max. allowable Approx. strength strength load weight DID HI-PWR-S 180HK 25.40 15.88 15.88 07.94 036.1 038.7 20.6 04.0 24.1 20.8 085.3 8,700 098.1 10,000 022.5 02,300 03.12 DID HI-PWR-S 100HK 31.75 19.05 19.05 09.54 043.6 046.2 24.4 04.8 30.1 26.0 126 12,900 145 14,800 034.3 03,500 04.37 DID HI-PWR-S 120HK 38.10 25.40 22.23 11.11 054.1 057.0 29.9 05.6 36.2 31.2 170 17,400 196 20,000 045.1 04,600 06.39 DID HI-PWR-S 140HK 44.45 25.40 25.40 12.71 057.9 062.1 33.3 06.4 42.4 36.3 221 22,600 255 26,000 060.8 06,200 09.25 DID HI-PWR-S 160HK 50.80 31.75 28.58 14.29 068.0 072.2 38.2 07.1 48.2 41.4 281 28,700 323 33,000 077.4 07,900 11.48 DID HI-PWR-S 180HK 57.15 35.72 35.71 17.46 075.5 081.0 43.3 08.0 54.2 46.6 421 43,000 461 47,000 091.2 09,300 15.55 DID HI-PWR-S 200HK 63.50 38.10 39.68 19.85 084.4 091.3 49.4 09.5 60.2 52.0 519 53,000 598 61,000 112 11,500 20.13 DID HI-PWR-S 240HK 76.20 47.63 47.63 23.81 108.0 115.6 61.7 12.7 72.2 62.0 802 81,800 922 94,000 155 15,900 29.72 Note: 1. The values of average tensile strength and maximum allowable tension are for chains. 2. When grooving using sprockets with smaller number of teeth, the grooves may interfere with the chain outer plate. Consult us. 63
Roller Chains for Power Transmission Ultimate Life Chain Series Roller Chains for Power Transmission Dependable in severe conditions Solid Bushing Chain (HT/ T), (D) DH- Chain (DHA) High-strength Roller Chain Series Name Features qIncorporating high precision solid bushing. wIdeally suited when increased wear resistance is required. eUp to ÇS times longer wear life than standard chain. qForming extremely hardened carbide layer on pin surface. wSuitable for bad atmosphere such as deterioration of lubrication and invasion of contaminant particles between pin and bushing. eUp to ÇV times longer wear life than standard chain. Functions Dirty Environment Tensile strength index 100 Temperature Range in Use 10 80 Dirty Environment Dusty Tensile strength index 100 Temperature Range in Use 10 80 Main uses PACK TEXTILE PRINT HOME APPLIANCE PACK TEXTILE PRINT CONVEYOR AGRICULTURE CONST- RUCTION ■ Table of Ultimate Life Chain Series Chain No. Long Life DH- O-Ring Sintered Bushing DID 25 DID 35 DID 41 DID 40 DID 50 DID 60 DID 80 DID 100 DID 120 DID 140 DID 160 DID 200 DID 240 HT T - D D D D D - - - - - 64 DHA DHA DHA DHA DHA DHA - - - - - - - - LD - LX LX LX LD LD LD LD LD LD LD - - - UR, URN UR, URN UR, URN UR, URN - - - - - - ■ Chain dimensions
Page 1 and 2:
©
Page 3 and 4:
DID's Quality Assurance ¡Customer
Page 5 and 6:
Cautions Cautions for handling of c
Page 7 and 8:
Cautions Cautions for using roller
Page 9 and 10:
INDEX 1 Roller Chains for Power Tra
Page 11 and 12:
Index (In alphabetical order) Produ
Page 13 and 14: 12
Page 15 and 16: Roller Chains for Power Transmissio
Page 63: Roller Chains for Power Transmissio
Page 115 and 116:
Roller Chains for Power Transmissio
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 140 and 141:
Small Conveyor Chains ¡General ¡S
Page 142 and 143:
Classification Major division Mediu
Page 144 and 145:
Hi-Guard (E) Double Guard (WG) Envi
Page 146 and 147:
Standard Attachment Chart : In sto
Page 148 and 149:
Tensile strength index 100 Temperat
Page 150 and 151:
Dirty Environment Tensile strength
Page 152 and 153:
Dirty Environment Dusty Tensile str
Page 154 and 155:
Dirty Environment Dusty Maintenance
Page 156 and 157:
Tensile Temperature strength index
Page 158 and 159:
Corrosive Atmosphere Moisture, Salt
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Corrosive Atmosphere Clean Areas Mo
Page 168 and 169:
Corrosive Atmosphere Alkaline Envir
Page 170 and 171:
Double Guard Chain (WG) qApprox. tw
Page 172 and 173:
Large roller (R) and small rollers
Page 174 and 175:
Dimensions of Sprocket for Double P
Page 176 and 177:
Standard Roller Chain Attachment :
Page 178 and 179:
Dimensions of Standard Roller Chain
Page 180 and 181:
Dirty Environment Tensile strength
Page 182 and 183:
Dirty Environment Dusty Tensile str
Page 184 and 185:
Dirty Environment Dusty Maintenance
Page 186 and 187:
Tensile Temperature strength index
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Corrosive Atmosphere Clean Areas Mo
Page 198 and 199:
Flexible Chain (FX) Other Conveyor
Page 200 and 201:
¡Duplex Every-two-link Top Roller
Page 202 and 203:
Dimensions of chain body Chain No.
Page 204 and 205:
[Type indication] Guide links are a
Page 206 and 207:
Meandering prevention chains An R r
Page 208 and 209:
Side Roller Chain with Breaks (TRB)
Page 210 and 211:
Small Conveyor Chains Flexible Chai
Page 212 and 213:
211
Page 214 and 215:
Calculation formulas of theoretical
Page 216 and 217:
Strength of Loaded Components The l
Page 218 and 219:
Conveyor Chains ¡Outline of Conve
Page 220 and 221:
Construction and Components of DK C
Page 222 and 223:
DK Conveyor Chains Standard Conveyo
Page 224 and 225:
Classified by Material and Heat Tre
Page 226 and 227:
Chain Specifications 1. Standard Co
Page 228 and 229:
Dimensional Drawings: DK 07075, DK
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Dimensional Drawings: DK 65300 and
Page 238 and 239:
Page 240 and 241:
Dimensional Drawings: DK 11152 (for
Page 242 and 243:
Page 244 and 245:
DK Conveyor Chains Anti-seizing Rol
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
DK Conveyor Chains Bearing Assemble
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
DK Conveyor Chains Seal Chain Seal
Page 274 and 275:
DK Conveyor Chains Strong H-type an
Page 276 and 277:
Dimensional Drawings: Strong Z-type
Page 278 and 279:
DK Conveyor Chains High Link-Plate
Page 280 and 281:
DK Conveyor Chains Conveyor Chain w
Page 282 and 283:
(a) Continuous Flow Conveyor Chain
Page 284 and 285:
(b) Chains for Dust Conveyor This c
Page 286 and 287:
Eco Slight (small sized apron conve
Page 288 and 289:
Bucket Elevator Chains A bucket ele
Page 290 and 291:
Flat Top Type Chain for Coil Convey
Page 292 and 293:
Block Chain When a chain having a h
Page 294 and 295:
DK Specialty Conveyor Chains Water
Page 296 and 297:
Sewage Treatment Chain (WS or WAS T
Page 298 and 299:
Heat treated stainless steel provid
Page 300 and 301:
DK Specialty Conveyor Chains 3D Ben
Page 302 and 303:
FH Type Chain for Freeyor An FH Typ
Page 304 and 305:
Booster Chain for Rivetless Chain A
Page 306 and 307:
Chain Bearing Roller PAT. Chain Bea
Page 308 and 309:
Deposit prevention type / IWD Dime
Page 310 and 311:
Long pan conveyor Apron conveyor A
Page 312 and 313:
Conveyors for slung articles Power-
Page 314 and 315:
Photo / Sprocket Photos of Specialt
Page 316 and 317:
315 Photo/ Sprocket Sprocket Tooth
Page 318 and 319:
Tooth Width of Conveyor Chain Sproc
Page 320 and 321:
Outer Diameter of DK Conveyor Chain
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Conveyor Chain Sprocket for NSE-typ
Page 328 and 329:
Shaft diameter and hub dimensions S
Page 330 and 331:
329
Page 332 and 333:
For Use at High-temperature Chains
Page 334 and 335:
Calculation Formula for Horizontal,
Page 336 and 337:
Examples of Calculation for Selecti
Page 338 and 339:
Technical Data Allowable Loads of R
Page 340 and 341:
Technical Data Corrosion Resistance
Page 342 and 343:
Technical Data Installation, Adjust
Page 344 and 345:
Lubrication To extend the life of c
Page 346 and 347:
Glossary Terms such as average tens
show all

DID 60 standard roller chain - Big Bike Webshop

Create successful ePaper yourself

Delete template?

Save as template?