13.03.2015 Views

DID 60 standard roller chain - Big Bike Webshop

DID 60 standard roller chain - Big Bike Webshop

DID 60 standard roller chain - Big Bike Webshop

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Technical Data Chain Selection<br />

Selection case !<br />

A conveyor <strong>chain</strong> for bucket elevator conveying a powder vertically<br />

using buckets.<br />

Specifications<br />

Conveyor type<br />

Guide discharge type bucket elevator<br />

Max. conveyance capacity<br />

Q 250 ton/h<br />

Conveyance speed S 25 m/min<br />

Horizontal center distance between sprocket shafts L 20 m<br />

Weight of bucket<br />

W1 <strong>60</strong> kg/m<br />

Weight of <strong>chain</strong><br />

W2<br />

(Estimate W2 as 20kg/m/strand for the initial calculation.)<br />

Bucket installation intervals<br />

500 mm<br />

Chain pitch<br />

250 mm<br />

Number of <strong>chain</strong> strands<br />

2 strands<br />

Calculation<br />

Technical Data<br />

Chain Selection<br />

Apply the formula for horizontal conveyance by scraping shown in the table on P333.<br />

Weight of traveling components per 1m MW12W2<strong>60</strong> 220100k/m<br />

Q<br />

g<br />

Max. <strong>chain</strong> tension T (16.7<br />

S<br />

M)(L2)<br />

1,000<br />

T(L2)<br />

Required power kW<br />

320<br />

When the values of the above specifications are applied to these formulas,<br />

250<br />

9.80665<br />

T (16.7<br />

25<br />

100)(202)<br />

1,000<br />

57.6 kN<br />

The value of T obtained here is a tension acting on two <strong>chain</strong> strands. So, the <strong>chain</strong> tension per stands is T/2.<br />

Since the conveyance speed (<strong>chain</strong> speed) is 25 m/min, the safety factor Ks is 7 from the table of P334.<br />

Furthermore, for an 12-hour operation per day with no lubrication, engendered by poor environment, the service<br />

factor Ke is 1.8 from the table on P333.<br />

57.6<br />

Required <strong>chain</strong> strength<br />

2<br />

71.8362.9 kN<br />

Therefore, NE Bucket Elevator Chain DK35Z250M can be tentatively selected as it satisfies the average tensile<br />

strength.<br />

Then, an accurate calculation can be done with the actual weight of the selected <strong>chain</strong>.<br />

Since the mass of this <strong>chain</strong> with Attachment G4 on every two links is 15k from the dimension table on P287,<br />

Weight of traveling components M<strong>60</strong>15290 k/m<br />

Therefore, the maximum service <strong>chain</strong> tension is<br />

250<br />

9.80665<br />

T(16.7<br />

25<br />

90)(202)<br />

1,000<br />

55.4 kN<br />

The <strong>chain</strong> tension per <strong>chain</strong> strand is<br />

55.4<br />

2<br />

71.8349 kN392 kN<br />

Hence, the <strong>chain</strong> size to be selected is DK35Z250M-2PG4.<br />

3922<br />

Conveyor <strong>chain</strong> safety factor Sf 14<br />

55.4<br />

Required power (when the mechanical transmission efficiency of drive is 0.8)<br />

55.425<br />

kW<br />

33.2 kW<br />

52.20.8<br />

336

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!