DID 60 standard roller chain - Big Bike Webshop

DK Specialty Conveyor Chains Conveyor Chain Exclusive for Specific Conveyance
Long Pan Conveyor Chain
As shown in the photo, this chain is used on a conveyor for
carrying bulk, using pans longer than the chain pitch (long
pan conveyor). Special attachments are installed to prevent
long pans from interfering with the motion of the chain at
the points of engagement with the sprockets. Furthermore,
to make the entire width of the conveyor smaller, the width
of the chain is smaller than a general use chain of the same
size, and a smaller pitch is adopted to ensure smooth
movement of the conveyor. We manufacture nine kinds of
standard Long Pan Conveyor Chains.
Long Pan Conveyor Chain is suitable for carrying a hard
abrasive powder of high temperature, and has attachments
for installing pans every four or eight links. Pans are pulled
by the roller shafts mounted on the attachments to receive
pans. Depending on the installation intervals of
attachments, L type (every eight links) and S type (every
four links) are available.
DK Specialty
Conveyor Chains
Feeding direction
Specialized
Application
Conveyor Chain
L Type Long Pan Conveyor Chain
Chain No.
Avg. tensile strength
Pitch
P
Roller link width
W
Roller dia.
R
Pin length
L
Plate
T H
DK 35-160L 323 33,000 160 36.0 44.5 141.7 9 50 47
DK 50-160L 490 50,000 160 46.0 50.8 154.1 9 65 63
DK 75-160L 735 75,000 160 51.4 63.5 187.8 12 80 106
DK 100-160L 980 100,000 160 55.0 70.0 209.5 16 90 155
DK 120-160L 1,176 120,000 160 65.0 75.0 221.5 16 100 185
Note: Ask us for the delivery time.
Unit (mm)
Approx. weight
S Type Long Pan Conveyor Chain
Chain No.
Avg. tensile strength
Pitch
P
Roller link width
W
Roller dia.
R
Pin length
L
Plate
T H
DK 20-160S 205 21,000 160 30.6 28.58 102.5 6 38 17
DK 35-160S 323 33,000 160 36.0 44.5 141.7 9 50 30
DK 50-160S 490 50,000 160 46.0 50.8 154.1 9 65 38
DK 75-160S 735 75,000 160 51.4 63.5 187.8 12 80 62
Note: Ask us for the delivery time.
Unit (mm)
Approx. weight
290