1735 Technical Manual - Novatech Controls
1735 Technical Manual - Novatech Controls
1735 Technical Manual - Novatech Controls
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
E<br />
F<br />
G<br />
A<br />
B<br />
Connector mounted on the<br />
probe head, viewed from the<br />
outside of the head<br />
D C<br />
Probe head<br />
connector<br />
6mm tube to reference air<br />
supply or internal pump<br />
Zirconia sensor<br />
A<br />
B<br />
Orange<br />
Black<br />
1 (5) SENS +<br />
2 (6) SENS -<br />
3 (7) TC+<br />
Thermocouple<br />
E<br />
C<br />
Red<br />
*Note 1<br />
4 (8) TC-<br />
Note 1: Jumper terminal 4 to 8 if efficiency or flue<br />
temperature display is required.<br />
Use copper wire.<br />
Green and yellow wire must be<br />
connected to the EARTH screw in<br />
the transmitter<br />
Connection of Probe Cable for Unheated Probes Models 1232.<br />
Connection of Probe Cable for Heated Probes Model 1231 and 1234.<br />
April 2012<br />
26 <strong>1735</strong> Water Vapour Transmitter
Change language