ISOCAM Interactive Analysis User's Manual Version 5.0 - ISO - ESA

13.1. CREATING A PDS FROM AN SSCD 97
OBSERVER STRING ’LMETCALF’
TDTOSN LONG 14300601
CHANNEL STRING ’LW’
PFOV FLOAT 6.00000
TINT FLOAT 5.04018
GAIN FLOAT 2.00000
FLTRWHL STRING ’LW6’
WAVELENGTH FLOAT 7.75000
NSCD INT 16
NBR_FRAME INT 348
FROM INT Array[16]
TO INT Array[16]
TAB_FRAME INT Array[16]
ADU_SEC_COEFF FLOAT Array[16]
TABFLATCOEF FLOAT Array[16]
CUBE FLOAT Array[32, 32, 348]
CUBE_UNIT STRING ’ADU’
MASK BYTE Array[32, 32, 348]
OTF BYTE Array[348]
DU FLOAT Array[348]
DV FLOAT Array[348]
UTK LONG Array[348]
BOOTTIME LONG Array[348]
TEMPERATURE FLOAT Array[10, 348]
IMAGE FLOAT Array[32, 32, 16]
IMAGE_UNIT STRING ’’
RMS FLOAT Array[32, 32, 16]
NPIX FLOAT Array[32, 32, 16]
CCIM STRUCT -> Array[1]
INFO STRUCT -> Array[1]
DARK FLOAT Array[32, 32]
FLAT FLOAT Array[32, 32]
CALG STRUCT -> Array[1]
HISTORY STRING Array[70]
SSCD_NAME STRING ’CSSC143006010002_98060117274484’
SAD_NAME STRING ’CSAD143006010204_98060119435439’
Before proceeding it is recommended to save this structure using IDL’s SAVE (with /xdr set
for portability).
CIA> save, filename=’lw6_raster.dat’, lw6_raster, /xdr
13.1.3 general PDS
This PDS is for general use and currently accommodates data from the following observations:
• Staring (AOT#1)
• Tracking (AOT#1)