ISOCAM Interactive Analysis User's Manual Version 5.0 - ISO - ESA

164 CHAPTER 15. CIA DATA STRUCTURE HIGH-LEVEL ARCHITECTURE
3. TARGET: Target name as it appears on original proposal. Type: string. e.g. ‘HARO 3’
4. OBSERVER: Observer’s name as it appears on the original proposal. Type: string. e.g.
‘LMETCALF’
5. TDT: TDT number. Type: integer.
6. OSN: OSN number. Type: integer.
7. F RASTER: Indicates the type of CAM01. Set to ‘UNDEFINED’ for AOTs other then
CAM01. Type: string.
The table below lists the possible values of F RASTER.
value
description
‘RASTER’
‘STARING’
‘MICRO SCAN’
‘TRACKING’
‘UNDEFINED’
raster observation
staring observation
micro-scan observation
tracking observation
observation is not CAM01
8. CHANNEL: CAM channel used in the observation. Possible values are: ‘LW’ or ‘SW’.
Type: string.
9. MODE: String indicating CAM OP-MODE. Type: string.
MODE may have the following values:
value
CAM mode description
‘IDLE’
‘OBS’
‘DARK’
‘FLAT’
‘CLEAN’
idle
performing an astronomical observation
obtaining a dark frame
obtaining an internal flat-field image
detector is being cleaned
10. FLTRWHL: Filter wheel used in the observation 2 . Type: string. e.g. ‘LW6’.
11. GAIN: Detector electronic gain. Possible values: 1, 2, 4. Type: integer.
12. TINT: Integration time of each FRAME. Type: float. Unit: seconds.
13. PFOV: Pixel field of view. Type: float. Unit: arcseconds.
14. WAVELENGTH: Wavelength of the current filter. Type: float. Unit: microns.
2 See the ISOCAM Observer’s Manual for possible values of FLTRWHL.