ISOCAM Interactive Analysis User's Manual Version 5.0 - ISO - ESA

Appendix G
Warning messages in CIA
This chapter contains a selection of common CIA messages.
G.1 Error messages
All error messages are expected to be self-explanatory...
G.2 Warning messages
Such messages contain warnings only. To judge the final quality of the data processing, users
should take them into account.
The following message indicate that a saturation occurred. The photometry for this exposure,
and, depending on the severity of the saturation, also subsequent exposures has to be carefully
assessed.
pixel [14,17] is affected by saturation at SCD 4 with the average value 4095.00
(value for End-of-Integration, 3 readouts)
G.3 Information messages
Such messages are for information only. Users don’t have to take any actions.
The following messages informs that only a “best match” for the calibration parameters
could be obtained:
CCGLWOFLT_99060112290500 not exact matching for : TINT= 36 15;
record index= 44
CCGLWDFLT_98031519384439 not exact matching for : SWHL= 220 88;
PFOV= 192 448; TINT= 36 15; record index= 14
The following message informs that for the dark correction the library dark instead of the
modelled dark was used:
No SW model - switching to library
The following message informs that no distortion calibration for this optical configuration
exists and no distortion correction was performed:
343