ISOCAM Interactive Analysis User's Manual Version 5.0 - ISO - ESA

Appendix B
CIA command short-list
This quick reference guide lists core CIA commands and groups them by processing level. User’s
may find it useful to make a copy of this chapter and keep it near to hand. A example of usage
and a very brief description is given for each command. Only the more important arguments
in the calling sequence are used – for an exhaustive list see the header documentation in the
on-line help (Section 2.3.2). Examples of usage for almost all the commands here appear in the
Quick Start Guide, or elsewhere in the CIA User’s Manual.
B.1 Data preparation (slicing)
This section lists routines that are used for generating an SPD SSCD per CAM CONFIGURA-
TION. Further routines are listed for creating the appropriately flavoured PDS from the SPD
SSCD. For a thorough treatment of slicing go to Chapter 12.
spdtoscd creates an SPD SSCD (per observation) from an SPD FITS product. This is probably
the simplest and fastest way to create an SPD SSCD.
CIA> spdtoscd, ’cisp02600506.fits’, spd_sscd, dir=’.’, /nowrite
x slicer is a widget program that can create an SPD SSCD (per CAM CONFIGURATION)
from either an ERD or SPD FITS product. Very flexible and interactive approach to
slicing.
CIA> x_slicer
erdtoscd creates an ERD SSCD (per observation) from an ERD FITS product.
CIA> erdtoscd, ’cier02600506.fits’, erd_sscd, dir=’.’, /nowrite
frames to image
converts an ERD SSCD to an SPD SSCD.
CIA> spd_sscd = frames_to_image( erd_sscd )
sscd info lists all the SCDs of an SSCD.
CIA> sscd_info, spd_sscd
313