ISOCAM Interactive Analysis User's Manual Version 5.0 - ISO - ESA

68 CHAPTER 10. FIRST LOOK AT THE DATA
Temporary mount to read contents of CD-ROM
%MOUNT-I-WRITELOCK, volume is write locked
%MOUNT-I-CDROM_ISO, I0058016:I0058016 (1 of 1) , mounted on _ISOW40$DKA600:
%COPY-S-COPIED, ISOW40$DKA600:[000000]DATALIST.TXT;1 copied to
OLP1:[IA.STEPHAN.TMP]DLIST.TMP;1 (14 blocks)
It then dismounts the drive and prompts for the data you wish to copy – you can choose
to copy data by instrument. Type a single letter (l,s,c and p for LWS, SWS, CAM and PHOT
respectively) for each instrument’s data that you want copied. If you are unsure, choose A for
all. The drive is then re-mounted and the transfer to disk is executed.
Now dismounting before final mount to read FITS data
%MOUNT-I-WRITELOCK, volume is write locked
%MOUNT-I-CDROM_ISO, I0058016:I0058016 (1 of 1) , mounted on _ISOW40$DKA600:
Ready for data transfers...
--------------------------------------------------------------------
Enter from 1 to 4 characters, one per instrument you want to copy,
for instance LS for LWS and SWS. Alternatively, you may copy all
data (example LPC, or CLPS; enter just A for all data): a
--------------------------------------------------------------------
--------------------------------------------
[Product sets]
--------------------------------------------
--------------------------------------------
Product set NR: P0087982, Proposer ID : LMETCALF
--------------------------------------------
==> Product: aocs58302914
=======> Creating aocs58302914.fits on OLP1:[IA.STEPHAN.TMP]
%COPY-S-COPIED, ISOW40$DKA600:[PRODUCTS.P0087982.58302914]AOCS.FIT;1 copied to
OLP1:[IA.STEPHAN.TMP]AOCS58302914.FITS;1 (1350 blocks
)
==> Product: eoha583
=======> Creating eoha583.fits on OLP1:[IA.STEPHAN.TMP]
...
==> Product: psta58303015
=======> Creating psta58303015.fits on OLP1:[IA.STEPHAN.TMP]
%COPY-S-COPIED, ISOW40$DKA600:[PRODUCTS.P0087984.58303015]PSTA.FIT;1 copied to
OLP1:[IA.STEPHAN.TMP]PSTA58303015.FITS;1 (34 blocks)
DATALIST.TXT finds 86 FITS files