DCT5280 - at Uniden

Read this First
This cordless telephone must be set up before use. Follow these steps:
Step 1 (page 11)
Unpack the telephone and accessories.
Step 2 (page 12)
Next, choose the best location to set up the
base unit.
Step 3 (page 13 to 17)
Then, insert the batteries into the handset.
Connect the base unit. You must charge the
batteries for 17-20 hours before plugging
into the phone line and using the phone.
Then set the dial mode.
Step 4 (page 18 to 30)
Finally, set the menu. You can set, for example:
clock, CIDCW setting, area code, TAD menu, and
Autotalk from the menu.
About the digital security code
This cordless telephone uses a digital
security code to prevent unauthorized
access to your base unit. This security
code prevents other cordless handsets
from making calls through your base
unit. If you want to change the
security code, see page 69.
[ 10 ]
GETTING STARTED