DCT5280 - at Uniden
DCT5280 - at Uniden
DCT5280 - at Uniden
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Setting the Dial Mode<br />
1) Enter the “Global Setup” menu, then the “Dial Mode” submenu<br />
(see “Entering the Menu” on page 23).<br />
2) Press volume/ ▲ or ▼ to change the selection, “Tone”<br />
or “Pulse” (the initial setting is Tone).<br />
3) Press the OK soft key. You will hear a confirm<strong>at</strong>ion tone.<br />
System Reset<br />
De-register the Handset<br />
1) Enter the “System Reset” menu, then “Deregister HS” submenu<br />
(see “Entering the Menu” on page 23).<br />
2) Press volume/ ▲ or ▼ to select the handset ID to be<br />
de-registered from the list, then press the OK soft key.<br />
3) Press the OK soft key. You will hear a confirm<strong>at</strong>ion tone.<br />
When de-registr<strong>at</strong>ion is complete, “Deregistr<strong>at</strong>ion<br />
Complete” appears.<br />
4) After de-registering the handset, move to “Replacing<br />
the Base Setting” below.<br />
Replacing the Base Setting<br />
1) Enter the “System Reset” menu, then “Replacing<br />
Base” submenu (see “Entering the Menu” on page 23).<br />
“Do you want to replace Base?” appears.<br />
2) Press the OK soft key. You will hear a conform<strong>at</strong>ion<br />
tone. The base inform<strong>at</strong>ion will be deleted.<br />
Dial Mode<br />
Tone<br />
Pulse<br />
BACK BACK OK<br />
Which Handset?<br />
Handset #1<br />
Handset #2<br />
BACK BACK OK<br />
Are you sure<br />
to deregister<br />
Handset #1?<br />
BACK BACK OK<br />
Do you want to<br />
replace Base?<br />
BACK BACK OK<br />
When replacing the base is complete, “Please Register” appears, register the<br />
handset(s) to the new base (see page 65).<br />
[ 30 ]<br />
GETTING STARTED