DCT5280 - at Uniden

More documents

Recommendations

Info

Cleaning the battery charging contacts To maintain a good charge, it is important to clean the charging contacts on both the handset and the base unit once a month. Use a dry cloth or pencil eraser to clean. If the contacts become very dirty, using water only, dampen a cloth to clean the charging contacts. Then make sure to go back over the charging contacts with a dry cloth before contacts returning the handset to the base to charge. C. Connect the base unit 1) Install the desk top/wall mount adapter into the notches on the base top. 2) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. [ 14 ] GETTING STARTED
3) Set the base on a desk or tabletop, and place the handset in the base unit as shown. 4) Make sure the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts. • Use only the supplied AD-830 AC adapter. Do not use any other AC adapter. • Connect the AC adapter to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. • While charging, all handset keys will be disabled. • After installing the batteries in the handset, charge your handset at least 17-20 hours before plugging into the phone line. 5) Once the handset batteries are fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet. If your telephone outlet isn't modular type, contact your telephone company for assistance. Modular D. Choose the dialing mode Most phone systems use tone dialing, which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the dial mode. To set the dial mode, see “Setting the Dial Mode” on page 30. • If you are not sure of your dialing system, set the unit to tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise set the unit to pulse dialing. • If your phone system requires pulse dialing and you need to send DTMF tones in certain situations during a call, you may “switch-over” to tone dialing. (Refer to “Tone Dialing Switch-over” on page 35.) Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard. GETTING STARTED GETTING STARTED [ 15 ]
Page 3 and 4: www.uniden.com
Page 5 and 6: Welcome Features Congratulations on
Page 7 and 8: Step 1 Charging the Batteries INSTA
Page 9 and 10: 20 21 22 23 24 25 26 27 28 29 30 31
Page 11 and 12: About Soft Key Function In the stan
Page 13 and 14: Checking the Package Contents Make
Page 15: B. Install the AA batteries into th
Page 19 and 20: Direct wall plate mounting If you d
Page 21 and 22: ▼ DirectLink Mode Handset Setup A
Page 23 and 24: Submenu name Description AutoTalk A
Page 25 and 26: Setting up the Menu Entering the Me
Page 27 and 28: Selecting a Ringer Tone 1) Enter th
Page 29 and 30: Answering System Setup Setting a PI
Page 31 and 32: Global Setup Setting Day and Time 1
Page 33 and 34: Making and Receiving Calls From the
Page 35 and 36: Redialing a Call The last three pho
Page 37 and 38: Tone Dialing Switch-over Some telep
Page 39 and 40: Flash and Call Waiting If you have
Page 41 and 42: 3) Press the STORE soft key, “Sto
Page 43 and 44: If you make a mistake while enterin
Page 45 and 46: Making Calls Using the Phonebook Fr
Page 47 and 48: Caller ID You must subscribe to Cal
Page 49 and 50: Deleting Information from the Calle
Page 51 and 52: Call Waiting Deluxe Features Your p
Page 53 and 54: Turning the Answering System On/Off
Page 55 and 56: Adjusting the speaker volume level
Page 57 and 58: Setting the ring time The ring time
Page 59 and 60: Selecting the language You can sele
Page 61 and 62: Skipping a message 1) Press to revi
Page 63 and 64: Remote Operation You can operate yo
Page 65 and 66: Playing incoming messages 1) When t
Page 67 and 68:
Register the Handset If you purchas
Page 69 and 70:
Intercom/Call Transfer Feature Inte
Page 71 and 72:
Changing the Digital Security Code
Page 73 and 74:
General Information The phone compl
Page 75 and 76:
Symptom Suggestion The Caller ID do
Page 77 and 78:
Precautions! Before you read anythi
Page 79 and 80:
I.C. Notice TERMINAL EQUIPMENT NOTI
Page 81 and 82:
Remote Operation Card Remote access
Page 83:
At Uniden, we’ll take care of you
show all

DCT5280 - at Uniden

Create successful ePaper yourself

Delete template?

Save as template?