DCT5280 - at Uniden
DCT5280 - at Uniden
DCT5280 - at Uniden
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Do not use an<br />
outlet controlled<br />
by a wall switch.<br />
Mounting the Base Unit on a Wall<br />
Standard wall pl<strong>at</strong>e mounting<br />
This phone can be mounted on any standard telephone wall pl<strong>at</strong>e.<br />
1) Snap the desk top/wall mount adapter into the notches on the base bottom.<br />
2) Plug the AC adapter to the DC IN 9V jack. Route the AC<br />
adapter cord inside the molded wiring channel as shown.<br />
3) Plug the AC adapter into a standard 120V AC wall outlet.<br />
4) Plug the telephone line cord into the TEL LINE jack.<br />
Route the cord inside the molded wiring channel as shown.<br />
5) Plug the telephone line cord into the<br />
telephone outlet.<br />
6) Raise the antenna to a vertical position.<br />
7) Align the mounting slots on the base with the<br />
mounting posts on the wall. Push in and down<br />
until the base is firmly se<strong>at</strong>ed.<br />
[ 16 ]<br />
GETTING STARTED