Handbook PO-505 - The ABC's of RMIS II Rail Management - APWU

Special Processing Screens
Data Field Command
KEY S
(NON-BMC)
Key S if RS is desired for
non-BMC origin.
Key B if RS is desired for BMC
origin.
FACILITY CODE If S was keyed above,
enter the three-character to
five-character alphanumeric
code for non-BMC origin
facility.
Press key. Routing
slips for all vans that have
schemes accepted from origin
facility are displayed.
Press key to
continue to the next van.
If B was keyed above,
enter the three-character to
five-character alphanumeric
code for the destination facility
desired.
Press key. The
routing slips for all vans that
have schemes accepted
to destination facility are
displayed.
Press key to
continue to next van.
Note: Refer to local printer commands to print hard
copy of routing slip.
Handbook PO-505 | May 2007 50