User Manual - cochlear implant HELP

Nucleus Freedom Sound Processor
4. Hold your Sound Processor firmly in place, and
determine where the tubing should be cut.
5. Mark the tubing, allowing for an additional few
millimetres, so it can attach to the earhook.
6. Cut the tubing ONLY when you are certain the length
will allow a secure and comfortable fit.
7. Feed it on to your earhook.
To wear the Processing Unit with the Mic Lock in place, fold
your ear down and gently pass your ear lobe through the
loop made by the Processing Unit and Mic Lock until it is in
position on your ear.
Alternatively, bring the tubing to the front of your ear and
feed it on to your earhook.
Your Sound Processor, with the Mic Lock in place, should fit
securely.
To remove the Processing Unit with the Mic Lock
attached, fold down your ear lobe and reverse the process.
Alternatively, ease the tubing off the earhook.
19