User Manual - cochlear implant HELP
User Manual - cochlear implant HELP
User Manual - cochlear implant HELP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Nucleus Freedom Sound Processor<br />
To change the sound level<br />
when using microphone<br />
sensitivity, press either<br />
the Increase or Decrease<br />
button. If not pressed again<br />
within a short time, the<br />
display will revert to the<br />
program display.<br />
When you change the volume level, the total sound signal<br />
changes, that is the level of the accessory and the microphone<br />
signal change together. Generally the volume control level<br />
should be set at 2 or more.<br />
To change the sound level when using an accessory, press<br />
either the Increase or Decrease button for more than one<br />
second. You will hear a tone and/or see a flashing ‘V’ on the<br />
display.<br />
The balance between the amount of sound heard from the<br />
accessory as compared with that heard from the Sound<br />
Processor microphone will be set for each program when the<br />
clinician sets up that program.<br />
If the sound level is unsatisfactory when you are using<br />
an accessory, ask your clinician to change it at your next<br />
programming session. Alternatively your clinician may give you<br />
different sound level options on different programs.<br />
49