User Manual - cochlear implant HELP
User Manual - cochlear implant HELP
User Manual - cochlear implant HELP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Nucleus Freedom Sound Processor<br />
Troubleshooting<br />
Your Freedom Sound Processor has several indicators of<br />
possible problems:<br />
• H1 - H5 messages show on the display<br />
• battery level indicator shows on the display (Bodyworn<br />
only)<br />
• indicator light changes its flashing pattern (if activated)<br />
• tone sound is heard (if activated)<br />
These are indicators that some action is required. For<br />
example, these indicators may occur when:<br />
• sound stops or becomes intermittent<br />
• battery life is running down or batteries are flat<br />
• the coil has come off the head or the connection is<br />
damaged<br />
This section describes what to do when a problem arises.<br />
After each step, check if you hear any sound.<br />
You may find the first H message is replaced with another.<br />
Take the action suggested to rectify that problem. Continue<br />
until no H messages are displayed.<br />
If there is still a problem indicated after you have made all the<br />
checks, contact your clinician. The Sound Processor should<br />
only be repaired by a person authorised by Cochlear Limited.<br />
Alternatively you may experience other problems which are<br />
listed under Other problems.<br />
58