You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
full calendar years and has had<br />
a production run of 1000 firearms<br />
per year for at least two<br />
years.<br />
Only the following modifications<br />
or alterations are permitted.<br />
1. Replacement of barrels<br />
with barrels of the same dinaensions.<br />
(Note: it is proposed that<br />
Semi-Auto barrels may be<br />
replaced with original barrels or<br />
barrels that do not exceed X oz.<br />
whichever is greater.) Ramped<br />
barrels are permitted.<br />
2. Replacement of sights<br />
with metal sights that don't extend<br />
beyond the end of the<br />
barrel or the rear of the gun.<br />
3. Replacement of triggers.<br />
4. Replacement of safeties<br />
so long as the weapon is still<br />
capable of being put into a safe<br />
non-fireable condition.<br />
(Beavertail safeties are approved.)<br />
5. Replacement of springs.<br />
6. Recoil spring guides that<br />
do not weigh more than 4 ounces.<br />
13. Replacement of magazine<br />
release, or release buttons.<br />
14. Fitting of slides to frames<br />
or cylinders to yokes.<br />
15. Cosmetic enhancements<br />
that don't give a competitive<br />
advantage such as custom grips,<br />
plating, checkering, etc.<br />
No other alterations are<br />
allowed. Some examples of<br />
common items that are<br />
excluded from this class are as<br />
follows:<br />
1. Electrical sights.<br />
2. Optical sights.<br />
3. Heavy barrels or barrel<br />
weights.<br />
4. Porting of barrels and<br />
slides.<br />
5. Heavy sighting ribs.<br />
6. Extended barrels.<br />
7. Compensators, either<br />
custom or factory supplied.<br />
8. Weighted grips.<br />
THE RO-1<br />
syste<br />
AMMUNITION<br />
Specialized ammunition that<br />
is loaded to make the major<br />
power factor and that is used to<br />
gain competitive advantage is<br />
not in keeping with the spirit of<br />
this class and is thereby<br />
excluded. This rule will be<br />
narrowly interpreted.<br />
Therefore, only those calibers<br />
that are produced by at least<br />
three commercial ammunition<br />
manufacturers, that are<br />
generally available at retailers<br />
across the country and that<br />
make the major power factor in<br />
a commercial form may be<br />
scored as major. Reloaded<br />
ammunition is permitted.<br />
HOLSTERS<br />
Because there are as raany<br />
opinions as there are shooters as<br />
to what constitutes a practical<br />
(Continued on page 48)<br />
uick Patch<br />
AND<br />
QUICK PATCH PASTERS<br />
7. Replacement of hammers.<br />
8. Enlarging or replacement<br />
of mag wells.<br />
9. Internal finishing to<br />
improve trigger pulls.<br />
10. Internal finishing to<br />
improve reliability.<br />
SAVES<br />
MAN HOURS<br />
FOR<br />
• MAJOR<br />
MATCHES<br />
• CLUB<br />
MATCHES<br />
• PRACTICE<br />
SESSIONS<br />
AUTOMATED TARGET REPAIR SYSTEM<br />
FIX 'EM AS FAST AS YOU SHOOT 'EM<br />
No more wasted time patching targets<br />
$7495<br />
AGE PAID CONT<br />
QUICK PATCh<br />
PASTERS ROLL 500<br />
,1 50 EA<br />
$15 25 — 12 ROLLS<br />
C.O.D.<br />
Or<br />
Certibed Check<br />
Or<br />
Money Order<br />
New Yo?k<br />
Add 7%<br />
Sakas Tax<br />
11. Enlarging of ejection<br />
ports.<br />
12. Chambering of revolver<br />
chambers and forcing cones.<br />
Dealer Inquiries<br />
Welcome!<br />
Send S.A S.E.<br />
JAMES DECFIISTO ENTERPRISES<br />
23 WILLOW DR.<br />
ROME, NY 13440<br />
(315) 33/-7610<br />
10 am • 2 p.m. Eastern<br />
(315) 33/4983<br />
4 p.m • 8 p.m Eastern<br />
November/December 1991 Page 47
Change language