Dolby/CP650 Setup Software Manual for Printing.pdf - Iceco.com
Dolby/CP650 Setup Software Manual for Printing.pdf - Iceco.com
Dolby/CP650 Setup Software Manual for Printing.pdf - Iceco.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Dolby</strong> <strong>CP650</strong> <strong>Setup</strong> <strong>Software</strong><br />
<strong>Setup</strong> Window<br />
Figure 2-8 <strong>Setup</strong> Room Levels Tab<br />
2.4.1 Surrounds<br />
Surrounds define the configuration of the surround channels <strong>for</strong> output-level adjust<br />
and B-Chain EQ. If operating disconnected, the interface provides two options <strong>for</strong><br />
surround configuration. If connected and a Surround EX adapter card is installed in<br />
the <strong>CP650</strong>, the selection is <strong>for</strong>ced to Surround EX and the button is disabled. If no<br />
Surround EX card is installed, the Surround EX button choice is not available.<br />
Conventional 5.1<br />
This is the default setting. <strong>Dolby</strong> Digital utilizes discrete left and right surround<br />
channels. During optical film playback, both Ls and Rs are fed an identical mono<br />
surround signal.<br />
Surround EX<br />
Surround EX includes channels Ls, Bsl (back surround left), Bsr (back surround<br />
right), and Rs.<br />
2.4.2 SPL Meter<br />
The Internal SPL meter can be used to set room levels of each channel, if calibrated.<br />
The microphone is connected through either the rear XLR connector or the front Mic<br />
Mux connector.<br />
Figure 2-9 Internal SPL Meter<br />
2-11
Change language