Dolby/CP650 Setup Software Manual for Printing.pdf - Iceco.com
Dolby/CP650 Setup Software Manual for Printing.pdf - Iceco.com
Dolby/CP650 Setup Software Manual for Printing.pdf - Iceco.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Dolby</strong> <strong>CP650</strong> <strong>Setup</strong> <strong>Software</strong><br />
Introduction<br />
retrieving settings from the <strong>CP650</strong>). If Send is selected, the parameter file that is open<br />
in the PC is sent to the <strong>CP650</strong>.<br />
Figure 1-1 Retrieve/Send Dialog Box<br />
Once connected, the user can adjust settings through the <strong>Setup</strong> tab property pages.<br />
Any changes to the settings, such as moving a slider control, are reflected<br />
immediately in the current operation of the <strong>CP650</strong>. Changes are saved to the<br />
permanent <strong>CP650</strong> Flash memory upon disconnect or exit from the <strong>Setup</strong> software. If<br />
the <strong>CP650</strong> is turned off be<strong>for</strong>e disconnecting from the <strong>Setup</strong> software, any parameter<br />
changes will be lost.<br />
Note: This is different from the front panel of the <strong>CP650</strong> operation. On the front<br />
panel, the user must explicitly Save each change via the OK button be<strong>for</strong>e leaving the<br />
screen <strong>for</strong> that setting.<br />
When connected, the fader knob is locked out; the Mute button remains functional.<br />
Any adjustment marks the open parameter file as modified, and any attempt to exit or<br />
open a different file prompts the user to save the current file.<br />
1-3