3DView manual milling - Emco Maier GmbH

EMCO WIN 3D-VIEW MILLINGBASIC SETTINGSPress the softkey "TYPE OFGRAPHICS" and select thegraphics type "3D".Basic SettingsInput of the Basic Settings for FAGOR 8055 MCwithout activated 4 th axisPressand select"3D-VIEW PARAMETER".You may define the followingsettings:3D-View View modeGlobal resolution:You may select values between0.01 and 0.3. The higher theresolution, the exacter is thestructure of the 3D-picture.Line of vision:The "line of vision" enables apresetting of the initial view onthe blank workpiece. Of course,the line of vision can always bechanged during simulation bymeans of the mouse.View mode:• Normal presentation• Wire frame complete • Wire frame• Transparent raw part13