3DView manual milling - Emco Maier GmbH

More documents

Recommendations

Info

EMCO WIN 3D-VIEW MILLINGCLAMPING DEVICE POSITIONClamping Device Positionin the direction of the X-AXISin the direction of the Y-AXIS=
EMCO WIN 3D-VIEW MILLINGSETUP TOOLHOLDERSetup ToolholderInput for Win 3D-View with FAGOR 8055 MCPress"TOOLS".and selectThe left half of the screen showsthe tool stations at the machine.Tool stations that are not occupiedare marked "--EMPTY--" .The right half of the screen showsthe list of available tool types.The lower part of the screenshows the selection boxes for thetool colour.Tool selection FAGOR 8055 MCFor the simulation it is necessary that the correcttools are related to the toolholder positions, just asthe tools must be clamped in the correct toolholderpositions during machining.Win 3D-View offers a tool library that includes allstandard tools of the EMCO PC machines and theEMCO Concept machines.Assign tool to tool station• Select the tool station to which the tool should beassigned by means of the direction keys.• Press ^ to get from the tool stations to the tooltypes. At the selected tool station the text becomesred.• Move to the tool that should be taken over into thetool holder by using the direction keys.• Press the softkey "TAKE TOOL" or (17(5 .• The desired tool will be assigned to the selectedtool station.A possibly already existing tool will be replaced bythe new tool.Remove tool from tool station• Use the direction keys to move the highlight to thetool station from which the tool should be removed.• Press the soft key "REMOVE TOOL".• The tool will be removed and the selected toolstation displays "--EMPTY--".• In this way please enter all tools being necessaryfor the simulation of the respective CNC-programat the corresponding positions.(6&• The changes are activated with the key.• The new settings become only active after thesimulation has been started anew by means ofthe softkeys "CLEAR SCREEN"+"START".Changing the tool colourEvery tool is being assigned a characteristic colourthat is displayed in the right colour field.• Select the tool at the tool station by using thedirection keys.• Press the softkey "CHANGE COLOUR". The toolcolours can be changed as desired by selectingthe RGB-values (red, green, blue) within a rangeof 0 to 255. The selected colour is displayed in theleft colour field.(6&• To save the new colour, please press thekey.• To restore the original colour of a tool, pleasepress the softkey "RESET COLOUR".• You can restore the original colour of all tools bypressing the softkey "STANDARD COLOURS".23
Page 5 and 6: EMCO WIN 3D-VIEW MILLINGINSTALLATIO
Page 7 and 8: EMCO WIN 3D-VIEW MILLINGCALL-UP OF
Page 9 and 10: EMCO WIN 3D-VIEW MILLINGCALL-UP OF
Page 11: EMCO WIN 3D-VIEW MILLINGCALL-UP OF
Page 14 and 15: EMCO WIN 3D-VIEW MILLINGBASIC SETTI
Page 21: EMCO WIN 3D-VIEW MILLINGBASIC SETTI
Page 25 and 26: EMCO WIN 3D-VIEW MILLINGSETUP TOOLH
Page 27 and 28: EMCO WIN 3D-VIEW MILLINGDEFINE WORK
Page 35 and 36: EMCO WIN 3D-VIEW MILLINGSIMULATIONS
Page 37 and 38: EMCO WIN 3D-VIEW MILLINGSIMULATIONS
Page 39 and 40: EMCO WIN 3D-VIEW MILLING3D-TOOLGENE
Page 41 and 42: EMCO WIN 3D-VIEW MILLING3D-TOOLGENE

3DView manual milling - Emco Maier GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?