3DView manual milling - Emco Maier GmbH

More documents

Recommendations

Info

EMCO WIN 3D-VIEW MILLINGSETUP TOOLHOLDERInput for Win 3D-View with FANUC 0-MC, FANUC 21 MB andSINUMERIK 810/820 MFor the simulation the correct tools have to be assignedto the tool positions. The same applies to themachining process, where the tools have to beclamped in the right position on the tool holder.The Win 3D-View offers a tool library that includes allstandard tools of the EMCO PC machines and theEMCO Concept machines.Tool selection FANUC 0-MC• Press the softkey "TOOLS", respectively the softkey "TOOL-SELECT" and the input pictures asshown on the opposite page are displayed.• You can define the tool station in the upper fieldcalled "TOOLHOLDER" by means of the softkeys"POS.+" and "POS.-" or the direction keys.• Select the corresponding tool within the box "TOOLLIBRARY" by using the soft keys "TOOL+" and"TOOL-" or the direction keys.The description and data of the selected tool aredisplayed.• Press the softkey "TAKE OVER", respectively"TAKE" or the ENTER key to assign the selectedtool to the tool station.• In this way enter all tools being necessary for thesimulation of the respective CNC-program in thecorresponding positions.Tool selection FANUC 21 MBNote:The tool number can be entered directly forthe tool holder position, where the cursorstands (e.g. 31 ENTER).Tool selection SINUMERIK 810/820 M24
EMCO WIN 3D-VIEW MILLINGSETUP TOOLHOLDERInput for Win 3D-View with SINUMERIK 810D/840DPress the "Tool" softkey.The left part of the screen showsthe tool stations of the machine.Tool stations that are not occupiedare marked "--EMPTY--".The right part of the screen showsa list of existing tool types.The lower part of the screenshows the selection fields for thetool colour.Tool selection SINUMERIK 810D/840DFor the simulation it is necessary that the correcttools are related to the tool holder positions, just asthe tools must be clamped in the correct toolholderpositions during machining.Win 3D-View offers a tool library that includes allstandard tools of EMCO PC machines and EMCOConcept machines.Assing tool to tool station• Click on the tool that should be taken over into thetool holder.• Click on the tool station to which the selected toolshould be assigned.• Press the "Take tool" softkey.• The desired tool will be assigned to the selectedtool station.A possibly already existing tool will be replaced bythe new one.Remove tool from tool station• Click on the tool station from which the tool shouldbe removed.• Press the "Remove tool" softkey.• The tool will be removed and the selected toolstation displays "--EMPTY--".• In this way please enter all tools, that are necessaryfor the simulation of the corresponding CNCprogram,at the correct tool positions.• By pressing the "OK" softkey the changes areactivated, by pressing "Abort" the changes will bedropped.• The new settings will be only activated after thesimulation has been started again with the "Start"softkey.Change of tool colourEvery tool is being assigned a characteristic colour.In order to change a tool colour you have to select thetool at the tool station by using the direction keys:• Select the tool at the tool station by means of thedirection keys.• Change the tool colours as desired by selectingthe RGB-values (red, green, blue) within a rangeof 0 to 255.• In order to store the new colour please press the"Assign tool colour" softkey.• In order to go back to the original colour of a tool,press the "Reset tool colour" softkey.• You can restore the original colour of all tools bypressing the softkey "Standard tool colours".25
Page 5 and 6: EMCO WIN 3D-VIEW MILLINGINSTALLATIO
Page 7 and 8: EMCO WIN 3D-VIEW MILLINGCALL-UP OF
Page 9 and 10: EMCO WIN 3D-VIEW MILLINGCALL-UP OF
Page 11: EMCO WIN 3D-VIEW MILLINGCALL-UP OF
Page 14 and 15: EMCO WIN 3D-VIEW MILLINGBASIC SETTI
Page 23: EMCO WIN 3D-VIEW MILLINGSETUP TOOLH
Page 27 and 28: EMCO WIN 3D-VIEW MILLINGDEFINE WORK
Page 35 and 36: EMCO WIN 3D-VIEW MILLINGSIMULATIONS
Page 37 and 38: EMCO WIN 3D-VIEW MILLINGSIMULATIONS
Page 39 and 40: EMCO WIN 3D-VIEW MILLING3D-TOOLGENE
Page 41 and 42: EMCO WIN 3D-VIEW MILLING3D-TOOLGENE

3DView manual milling - Emco Maier GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?