Owner's Manual - La Toile des batteurs

Useful Functions to KnowAbout the Preset Drum KitsThe TD-12 is shipped from the factory with 50 pre-loadeddrum kits. These drum kits are referred to as Preset DrumKits.The features of each preset drum kit, pad pattern functionsettings, and other information is listed in the Preset DrumKit List (p. 84). Look through this list to find the kit you wantto use.Playing Patterns to CheckDrum Kit TonesThe preset patterns offer a convenient way to check the drumkit sounds.By selecting instruments and then playing back patterns withthese instruments, you can confirm the sounds of instrumentcombinations; for example, kick and snare or snare and tom.No. Name Use1 DrumPreview1 To check the kick, snare, and hihatsounds2 DrumPreview2 To check the kick, snare, and ridecymbal sounds3 DrumFill 1 To check the tom and crash cymbalsounds4 DrumFill 2 To check the tom and crash cymbalsounds* You can use the [GROUP FADERS] to change the volumebalance and mute any unneeded instrument sounds.Restoring Edited Drum Kits tothe Factory Default SettingsRestoring All Settings to the FactorySettingsThis restores the TD-12 to the original factory settings(Factory Reset).All data and settings stored in the TD-12 are lost incarrying out this operation. So if necessary, save yourdata to an external MIDI device before executing thefactory reset.(Bulk Dump; [SETUP] - [F1 (MIDI)] -[F5 (BULK)]; p. 75)1. Press [SETUP] - [F5 (F RESET)].[SETUP] lights, and the “FACTORY RESET” screenappears.2. Press [F5 (RESET)].The confirmation screen appears.* To cancel, press [F1 (CANCEL)].3. Press [F5 (EXECUTE)] to execute FactoryReset.When Factory Reset is finished, the “DRUM KIT” screenappears.Restoring the Factory Settings toIndividual KitsWhen resetting individual drum kits whose instrument and/or effect settings have been changed to the original factorysettings, use the Copy function (p. 70).1. Hold down [SHIFT] and press [SETUP].[SETUP] lights, and the “COPY” screen appears.2. Press [F1 (KIT)].fig.00-CopyKit_70ABCA: copy-source type (PRESET or USER)B: copy-sourceC: copy-destination28