Owner's Manual - La Toile des batteurs

Chapter 3. Mixer SettingsMixer Parameters [MIXER]Here you can adjust the volume, pan, etc.fig.03-001_70Using Group Faders to Edit (MIX EDIT)You can use the GROUP FADERS to make adjustments.fig.03-002_701. Press [MIXER].[MIXER] lights.2. Use [F1]–[F4] or [CURSOR (up/down)] to selectthe parameter.3. Use [CURSOR (left/right)] or [RIM] to select theinstrument you wish to set.You can also select the instrument by striking a pad.4. Use [+/-], [VALUE], or [CURSOR (up/down)] tomake the setting.1. Press [INST] and [MIXER] simultaneously.[MIXER] flashes.You can change the function of the faders by holdingdown [SHIFT] and pressing [MIXER]. When lowerindicator is lit, you can adjust the volume of AUX 1 andAUX2.2. Press [F1]–[F3] to select the parameter.3. Move the fader which corresponds to theTRIGGER INPUT you wish to adjust.* You can also use [+/-], [VALUE], or [CURSOR (up/down)].Chapter 3[MIXER]Parameter Value Description[F1 (VOLUME)]Volume 0–127 Volume of each trigger input[F2 (PAN)]PanL15–CTR– Pan of each trigger inputR15[F3 (MIN VOL)]MinimumVolume0–10 Minimum volume of eachtrigger input(This is used to narrow thedynamic range.)[F4 (KIT VOL)]Kit Volume 0–127 Volume of the entire drumkitPedal HHVolumeXStick Volume0–127 Volume of the hi-hat’s footclosed sound0–127 Volume of cross stick sound* Pressing [F5 (H & R)] in the [F1 (VOLUME)], [F2 (PAN)], or[F3 (MIN VOL)] setting screen, you can choose to set the headand rim simultaneously or individually.5. Press [EXIT] to return to the “DRUM KIT”screen.Parameter Value Description[F1 (VOLUME)]Volume 0–127 Volume of each trigger input[F2 (AMB SND)]AMB SENDLEVEL[F3 (MFX SND)]MFX SENDLEVEL0–127 Send level to the ambience foreach trigger input0–127 Send level to the multi-effectsfor each trigger input* These settings are always common to the head and rim.4. Press [EXIT] or [FADER] to return to the “DRUMKIT” screen.* After pressing [EXIT] or [FADER], the values for the[GROUP FADERS] sliders may not reflect the actual volumeof the sound assigned to that fader. Be sure to move the faders abit before making your setting.39