Owner's Manual - La Toile des batteurs

Chapter 9. Settings for the Entire TD-12 [SETUP]Synchronizing Images to aTD-12 Performance[F4 (V-LINK)]What is V-LINK?V-LINK () is a function that allows music andimages to be performed together. By using MIDI to connecttwo or more V-LINK compatible devices, you can easily enjoyperforming a wide range of visual effects that are linked to theexpressive elements of a music performance.For example, by using the TD-12 and Edirol DV-7PR together,you can use the pads connected to the TD-12 to switch theEdirol DV-7PR’s images (clips/palettes).Using V-LINKTurning V-LINK On/Off1. Press [SETUP] - [F4 (V-LINK)].[SETUP] lights, and the “V-LINK” screen appears.fig.09-VLink_702. Press [F5 (V-LINK)] to turn the V-LINK functionON and OFF.fig.09-VLinkOn1_70* In order to use V-LINK with the TD-12 and Edirol DV-7PR,you will need to make connections using an Edirol UM-1X/UM-1SX (sold separately).Connection Examples* Before connecting this unit to other devices, turn off the powerto all units. This will help prevent malfunctions and/or damageto speakers or other devices.Use an Edirol UM-1X to connect the TD-12’s MIDI OUTconnector to the Edirol DV-7PR’s remote jack.fig.V-LINKconnect.e* Before turning V-LINK on, turn the Edirol DV-7PR’s poweron.3. Press [KIT] to display the “DRUM KIT” screen.When V-LINK is on, the V-LINK icon appears in the “DRUMKIT” screen.fig.09-VLinkOn2_70ProjectorEdirol DV-7PRREMOTE* The V-LINK function will always be OFF when you turn theTD-12’s power on.Edirol UM-1XMIDI OUTDisplayV-LINK MIDI Ch (V-LINK MIDI Channel)When V-LINK function is on, the performance data recordedin the backing part of the sequencer is transmitted on thischannel.* At the factory settings, this is set to “CH16.”V-LINK Device IDSet this ID to match the device ID number of the videoequipment which is controlled by the TD-12. If this is set to“128,” you can control the video equipment regardless of thedevice ID number of it.TD-12* At the factory settings, this is set to “17.”78