Mizu Webphone - Mizu Voip

autoignore(int)Set to ignore all incoming calls.0=don’t ignore1=silently ignore2=rejectDefault value is 0.autoaccept(boolean)Set to true to automatically accept all incoming calls (autoanswer).Default value is false.ringtimeout(number)Maximum ring time allowed in millisecond.Default is 90000 (90 second)calltimeout(number)Maximum speech time allowed in millisecond.Default is 10800000 (3 hour)startsipstack(number)Automatically start the sipstack after a specified time.0=no (the sipstack will be started on the first register or call event)1=on startup (the sipstack will be started at applet init)Other=seconds (the sipstack will be started after the specified seconds)Default value is 1You can set to 0 if there is less change that the webphone will be used once the users will open the webpage hosting the webphone.You can set to 1 or higher if there is a high probability that the user will use the webphone to make calls (this will shorten the setup time for the first call)Default value is 0.timer(number)You can slow down or speed up the SIP protocol timers with this setting. You may set it to 15 if you have a slow server or slow network.Default value is 10.timer2(number)Same as “timer” but it affects idle, connect and ring timeout and maximum call durations.Default value is 10.mediatimeout(number)RTP timeout in seconds to protect again dead sessions.Calls will be disconnected if no media packet is sent and received for this interval.